diff -ruNp libtool-1.5.8/ChangeLog libtool-1.5.10/ChangeLog --- libtool-1.5.8/ChangeLog 2004-08-07 21:24:38.000000000 +0900 +++ libtool-1.5.10/ChangeLog 2004-09-19 21:46:56.000000000 +0900 @@ -1,11 +1,63 @@ +2004-09-19 Peter O'Gorman + + GNU libtool 1.5.10 is released. + + * configure.ac: Bump version. + * NEWS: Updated. + +2004-09-19 Ralf Wildenhues + + * libtool.m4 (AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): The linker + distinguishes data and code symbols on linux-gnu/ia64. Fixes + multiple testsuite failures. Backport from 1.9c. + +2004-09-19 Alexandre Duret-Lutz , + Ralf Wildenhues + * demo/Makefile.am, pdemo/Makefile.am: Use per-target CFLAGS + only for the Libtool-built objects, so that automake won't + complain about missing AM_PROG_CC_C_O but still compile Libtool- + and non-Libtool objects into different names. + +2004-09-13 Ralf Wildenhues + + * ltdl.c (memcpy, memmove): Fix pre-ANSI replacement functions + to not use pointer-to-void arithmetic. + (memmove): Fix infinite loop. + +2004-09-12 Brad + + * libtool.m4: Fixes for the OpenBSD support + +2004-08-12 Maciej W. Rozycki + + * demo/Makefile.am: Stop automake warning by defining + libhell0_a_CFLAGS. + * pdemo/Makefile.am: Ditto. + +2004-08-12 Peter O'Gorman + + * configure.ac, libtool.m4: Ensure that a c++ compiler exists before + checking for the c++ preprocessor. Apparently reported by multiple + people, multiple times. + + * libtool.m4 [GNU/linux] (AC_DEPLIBS_CHECK_METHOD): Cleanup, + thanks to Daniel Reed. + +2004-08-11 Daniel Reed + + * tests/demo-nopic.test: Do not run on x86_64 or s390* + 2004-08-07 Peter O'Gorman + * configure.ac: Bumped version to 1.5.9a. + * NEWS: updated. + GNU libtool-1.5.8 is released. * NEWS: updated. * configure.ac: Bumped version to 1.5.8. * config.guess, config.sub: Synchronized from ftp.gnu.org. - + 2004-08-04 Peter O'Gorman * libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Since CONFIG_SHELL may @@ -32,7 +84,7 @@ 2004-08-01 Maciej W. Rozycki - * libtool.m4 (LT_AC_PROG_SED): Set SED when running from cache as + * libtool.m4 (LT_AC_PROG_SED): Set SED when running from cache as well. 2004-07-30 Peter O'Gorman @@ -52,7 +104,7 @@ 2004-07-22 Joe Orton - * libtool.m4: Treat bsdi5* like bsdi4*. + * libtool.m4: Treat bsdi5* like bsdi4*. 2004-07-08 Peter O'Gorman @@ -2884,4 +2936,4 @@ Continued in ChangeLog.1 - $Revision: 1.1220.2.118 $ $Date: 2004/08/07 12:24:38 $ + $Revision: 1.1220.2.131 $ $Date: 2004/09/19 12:46:56 $ diff -ruNp libtool-1.5.8/INSTALL libtool-1.5.10/INSTALL --- libtool-1.5.8/INSTALL 2004-03-07 00:30:41.000000000 +0900 +++ libtool-1.5.10/INSTALL 2004-09-19 21:40:53.000000000 +0900 @@ -1,13 +1,16 @@ -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software -Foundation, Inc. +Installation Instructions +************************* - This file is free documentation; the Free Software Foundation gives +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free +Software Foundation, Inc. + +This file is free documentation; the Free Software Foundation gives unlimited permission to copy, distribute and modify it. Basic Installation ================== - These are generic installation instructions. +These are generic installation instructions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -67,9 +70,9 @@ The simplest way to compile this package Compilers and Options ===================== - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. +Some systems require unusual options for compilation or linking that the +`configure' script does not know about. Run `./configure --help' for +details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here @@ -82,7 +85,7 @@ is an example: Compiling For Multiple Architectures ==================================== - You can compile the package for more than one kind of computer at the +You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of `make' that supports the `VPATH' variable, such as GNU `make'. `cd' to the @@ -99,19 +102,19 @@ for another architecture. Installation Names ================== - By default, `make install' will install the package's files in +By default, `make install' will install the package's files in `/usr/local/bin', `/usr/local/man', etc. You can specify an installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. +option `--prefix=PREFIX'. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. +give `configure' the option `--exec-prefix=PREFIX', the package will +use PREFIX as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix. In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular +options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories you can set and what kinds of files go in them. @@ -122,7 +125,7 @@ option `--program-prefix=PREFIX' or `--p Optional Features ================= - Some packages pay attention to `--enable-FEATURE' options to +Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -137,11 +140,11 @@ you can use the `configure' options `--x Specifying the System Type ========================== - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the +There may be some features `configure' cannot figure out automatically, +but needs to determine by the type of machine the package will run on. +Usually, assuming the package is built to be run on the _same_ +architectures, `configure' can figure that out, but if it prints a +message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -167,9 +170,9 @@ eventually be run) with `--host=TYPE'. Sharing Defaults ================ - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. +If you want to set default values for `configure' scripts to share, you +can create a site shell script called `config.site' that gives default +values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -178,7 +181,7 @@ A warning: not all `configure' scripts l Defining Variables ================== - Variables not defined in a site shell script can be set in the +Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -192,8 +195,7 @@ overridden in the site shell script). `configure' Invocation ====================== - `configure' recognizes the following options to control how it -operates. +`configure' recognizes the following options to control how it operates. `--help' `-h' diff -ruNp libtool-1.5.8/Makefile.in libtool-1.5.10/Makefile.in --- libtool-1.5.8/Makefile.in 2004-08-07 21:03:56.000000000 +0900 +++ libtool-1.5.10/Makefile.in 2004-09-19 21:21:59.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -34,6 +34,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \ @@ -47,9 +48,10 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(aclocaldir)" "$(DESTDIR)$(pkgdatadir)" +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(aclocaldir)" \ + "$(DESTDIR)$(pkgdatadir)" binSCRIPT_INSTALL = $(INSTALL_SCRIPT) SCRIPTS = $(bin_SCRIPTS) SOURCES = @@ -60,6 +62,12 @@ RECURSIVE_TARGETS = all-recursive check- install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; aclocalDATA_INSTALL = $(INSTALL_DATA) pkgdataDATA_INSTALL = $(INSTALL_DATA) DATA = $(aclocal_DATA) $(pkgdata_DATA) @@ -171,6 +179,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -313,7 +323,7 @@ install-aclocalDATA: $(aclocal_DATA) test -z "$(aclocaldir)" || $(mkdir_p) "$(DESTDIR)$(aclocaldir)" @list='$(aclocal_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(aclocalDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(aclocaldir)/$$f'"; \ $(aclocalDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(aclocaldir)/$$f"; \ done @@ -321,7 +331,7 @@ install-aclocalDATA: $(aclocal_DATA) uninstall-aclocalDATA: @$(NORMAL_UNINSTALL) @list='$(aclocal_DATA)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \ rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \ done @@ -330,7 +340,7 @@ install-pkgdataDATA: $(pkgdata_DATA) test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)" @list='$(pkgdata_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \ $(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \ done @@ -338,7 +348,7 @@ install-pkgdataDATA: $(pkgdata_DATA) uninstall-pkgdataDATA: @$(NORMAL_UNINSTALL) @list='$(pkgdata_DATA)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \ done @@ -495,12 +505,14 @@ distdir: $(DISTFILES) list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ - || mkdir "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="../$(top_distdir)" \ - distdir="../$(distdir)/$$subdir" \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ @@ -511,15 +523,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -532,7 +544,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -541,11 +553,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -630,7 +642,7 @@ clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @@ -698,15 +710,15 @@ uninstall-info: uninstall-info-recursive distclean-tags distcleancheck distdir distuninstallcheck dvi \ dvi-am html html-am info info-am install install-aclocalDATA \ install-am install-binSCRIPTS install-data install-data-am \ - install-exec install-exec-am install-info install-info-am \ - install-man install-pkgdataDATA install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic maintainer-clean-recursive \ - mostlyclean mostlyclean-generic mostlyclean-libtool \ - mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ - uninstall uninstall-aclocalDATA uninstall-am \ - uninstall-binSCRIPTS uninstall-info-am uninstall-local \ - uninstall-pkgdataDATA + install-data-hook install-exec install-exec-am install-info \ + install-info-am install-man install-pkgdataDATA install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-generic \ + mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-aclocalDATA \ + uninstall-am uninstall-binSCRIPTS uninstall-info-am \ + uninstall-local uninstall-pkgdataDATA libtool: $(srcdir)/ltmain.sh $(top_builddir)/configure.ac diff -ruNp libtool-1.5.8/NEWS libtool-1.5.10/NEWS --- libtool-1.5.8/NEWS 2004-08-07 21:23:20.000000000 +0900 +++ libtool-1.5.10/NEWS 2004-09-19 21:18:59.000000000 +0900 @@ -1,5 +1,10 @@ NEWS - list of user-visible changes between releases of GNU Libtool +New in 1.5.10: 2004-09-19; CVS version 1.5.9a, Libtool team: +* GNU/linux ia64 fixes. +* Works on platforms with no c++ compiler. +* Bug Fixes. + New in 1.5.8: 2004-08-07; CVS version 1.5.7a, Libtool team: * Support for Intel C++ version 8.0. * Improved support for OpenBSD. diff -ruNp libtool-1.5.8/acinclude.m4 libtool-1.5.10/acinclude.m4 --- libtool-1.5.8/acinclude.m4 2004-08-07 21:03:25.000000000 +0900 +++ libtool-1.5.10/acinclude.m4 2004-09-19 21:21:26.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/aclocal.m4 libtool-1.5.10/aclocal.m4 --- libtool-1.5.8/aclocal.m4 2004-08-07 21:03:40.000000000 +0900 +++ libtool-1.5.10/aclocal.m4 2004-09-19 21:21:43.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/cdemo/Makefile.in libtool-1.5.10/cdemo/Makefile.in --- libtool-1.5.8/cdemo/Makefile.in 2004-08-07 21:05:42.000000000 +0900 +++ libtool-1.5.10/cdemo/Makefile.in 2004-09-19 21:23:48.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -38,6 +38,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = cdemo$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \ @@ -53,7 +54,7 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) am__DEPENDENCIES_1 = @@ -71,11 +72,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libfoo_la_SOURCES) $(cdemo_SOURCES) DIST_SOURCES = $(libfoo_la_SOURCES) $(cdemo_SOURCES) @@ -161,6 +162,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -387,15 +390,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -408,7 +411,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -417,11 +420,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -504,7 +507,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/cdemo/acinclude.m4 libtool-1.5.10/cdemo/acinclude.m4 --- libtool-1.5.8/cdemo/acinclude.m4 2004-08-07 21:05:09.000000000 +0900 +++ libtool-1.5.10/cdemo/acinclude.m4 2004-09-19 21:23:10.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/cdemo/aclocal.m4 libtool-1.5.10/cdemo/aclocal.m4 --- libtool-1.5.8/cdemo/aclocal.m4 2004-08-07 21:05:27.000000000 +0900 +++ libtool-1.5.10/cdemo/aclocal.m4 2004-09-19 21:23:30.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/cdemo/configure libtool-1.5.10/cdemo/configure --- libtool-1.5.8/cdemo/configure 2004-08-07 21:05:47.000000000 +0900 +++ libtool-1.5.10/cdemo/configure 2004-09-19 21:23:53.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS LIBM LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS LIBM LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1515,7 +1515,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1692,13 +1692,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1842,9 +1850,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1937,6 +1942,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3542,15 +3554,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -3669,7 +3672,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3672 "configure"' > conftest.$ac_ext + echo '#line 3675 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -4918,7 +4921,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5148,6 +5156,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5241,7 +5251,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5244:" \ +echo "$as_me:5254:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5519,6 +5529,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6295,11 +6312,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6298: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6315: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6302: \$? = $ac_status" >&5 + echo "$as_me:6319: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6538,11 +6555,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6541: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6558: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6545: \$? = $ac_status" >&5 + echo "$as_me:6562: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6598,11 +6615,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6601: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6618: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6605: \$? = $ac_status" >&5 + echo "$as_me:6622: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8783,7 +8800,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10396,6 +10415,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11074,11 +11095,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11077: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11098: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11081: \$? = $ac_status" >&5 + echo "$as_me:11102: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11134,11 +11155,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11137: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11158: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11141: \$? = $ac_status" >&5 + echo "$as_me:11162: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12495,7 +12516,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13454: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13437: \$? = $ac_status" >&5 + echo "$as_me:13458: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13490,11 +13511,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13493: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13514: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13497: \$? = $ac_status" >&5 + echo "$as_me:13518: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15529,11 +15550,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15532: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15553: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15536: \$? = $ac_status" >&5 + echo "$as_me:15557: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15772,11 +15793,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15775: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15796: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15779: \$? = $ac_status" >&5 + echo "$as_me:15800: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15832,11 +15853,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15835: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15856: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:15839: \$? = $ac_status" >&5 + echo "$as_me:15860: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18017,7 +18038,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/compile libtool-1.5.10/compile --- libtool-1.5.8/compile 1970-01-01 09:00:00.000000000 +0900 +++ libtool-1.5.10/compile 2004-09-03 23:32:39.000000000 +0900 @@ -0,0 +1,136 @@ +#! /bin/sh +# Wrapper for compilers which do not understand `-c -o'. + +scriptversion=2003-11-09.00 + +# Copyright (C) 1999, 2000, 2003 Free Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +case $1 in + '') + echo "$0: No command. Try \`$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand `-c -o'. +Remove `-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file `INSTALL'. + +Report bugs to . +EOF + exit 0 + ;; + -v | --v*) + echo "compile $scriptversion" + exit 0 + ;; +esac + + +prog=$1 +shift + +ofile= +cfile= +args= +while test $# -gt 0; do + case "$1" in + -o) + # configure might choose to run compile as `compile cc -o foo foo.c'. + # So we do something ugly here. + ofile=$2 + shift + case "$ofile" in + *.o | *.obj) + ;; + *) + args="$args -o $ofile" + ofile= + ;; + esac + ;; + *.c) + cfile=$1 + args="$args $1" + ;; + *) + args="$args $1" + ;; + esac + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no `-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # `.c' file was seen then we are probably linking. That is also + # ok. + exec "$prog" $args +fi + +# Name of file we expect compiler to create. +cofile=`echo $cfile | sed -e 's|^.*/||' -e 's/\.c$/.o/'` + +# Create the lock directory. +# Note: use `[/.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo $cofile | sed -e 's|[/.-]|_|g'`.d +while true; do + if mkdir $lockdir > /dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir $lockdir; exit 1" 1 2 15 + +# Run the compile. +"$prog" $args +status=$? + +if test -f "$cofile"; then + mv "$cofile" "$ofile" +fi + +rmdir $lockdir +exit $status + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-end: "$" +# End: diff -ruNp libtool-1.5.8/config.guess libtool-1.5.10/config.guess --- libtool-1.5.8/config.guess 2004-08-07 21:14:18.000000000 +0900 +++ libtool-1.5.10/config.guess 2004-09-19 21:40:53.000000000 +0900 @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. -timestamp='2004-07-19' +timestamp='2004-09-07' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -203,9 +203,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; cats:OpenBSD:*:*) echo arm-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -230,18 +227,12 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ mvmeppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} + echo mips64-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sun3:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -833,6 +824,12 @@ EOF cris:Linux:*:*) echo cris-axis-linux-gnu exit 0 ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit 0 ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; @@ -1179,9 +1176,10 @@ EOF echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) - case `uname -p` in + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in *86) UNAME_PROCESSOR=i686 ;; - powerpc) UNAME_PROCESSOR=powerpc ;; + unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit 0 ;; diff -ruNp libtool-1.5.8/config.sub libtool-1.5.10/config.sub --- libtool-1.5.8/config.sub 2004-08-07 21:14:19.000000000 +0900 +++ libtool-1.5.10/config.sub 2004-09-19 21:40:53.000000000 +0900 @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. -timestamp='2004-06-24' +timestamp='2004-08-29' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -457,6 +457,9 @@ case $basic_machine in crds | unos) basic_machine=m68k-crds ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; diff -ruNp libtool-1.5.8/configure libtool-1.5.10/configure --- libtool-1.5.8/configure 2004-08-07 21:04:02.000000000 +0900 +++ libtool-1.5.10/configure 2004-09-19 21:22:04.000000000 +0900 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.59 for libtool 1.5.8. +# Generated by GNU Autoconf 2.59 for libtool 1.5.10. # # Report bugs to . # @@ -425,8 +425,8 @@ SHELL=${CONFIG_SHELL-/bin/sh} # Identity of this package. PACKAGE_NAME='libtool' PACKAGE_TARNAME='libtool' -PACKAGE_VERSION='1.5.8' -PACKAGE_STRING='libtool 1.5.8' +PACKAGE_VERSION='1.5.10' +PACKAGE_STRING='libtool 1.5.10' PACKAGE_BUGREPORT='bug-libtool@gnu.org' ac_unique_file="ltmain.in" @@ -468,7 +468,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS TIMESTAMP INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot pkgdatadir aclocaldir subdirs CONF_SUBDIRS ACINCLUDE_M4_LIST DIST_MAKEFILE_LIST CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LD NM LN_S CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE HAVE_CXX_TRUE HAVE_CXX_FALSE F77 FFLAGS ac_ct_F77 HAVE_F77_TRUE HAVE_F77_FALSE GCJ ac_ct_GCJ GCJFLAGS HAVE_GCJ_TRUE HAVE_GCJ_FALSE RC ac_ct_RC HAVE_RC_TRUE HAVE_RC_FALSE ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXXCPP LIBTOOL LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS TIMESTAMP INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar pkgdatadir aclocaldir subdirs CONF_SUBDIRS ACINCLUDE_M4_LIST DIST_MAKEFILE_LIST CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LD NM LN_S CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE HAVE_CXX_TRUE HAVE_CXX_FALSE F77 FFLAGS ac_ct_F77 HAVE_F77_TRUE HAVE_F77_FALSE GCJ ac_ct_GCJ GCJFLAGS HAVE_GCJ_TRUE HAVE_GCJ_FALSE RC ac_ct_RC HAVE_RC_TRUE HAVE_RC_FALSE ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXXCPP LIBTOOL LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -957,7 +957,7 @@ if test "$ac_init_help" = "long"; then # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures libtool 1.5.8 to adapt to many kinds of systems. +\`configure' configures libtool 1.5.10 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1023,7 +1023,7 @@ fi if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of libtool 1.5.8:";; + short | recursive ) echo "Configuration of libtool 1.5.10:";; esac cat <<\_ACEOF @@ -1163,7 +1163,7 @@ fi test -n "$ac_init_help" && exit 0 if $ac_init_version; then cat <<\_ACEOF -libtool configure 1.5.8 +libtool configure 1.5.10 generated by GNU Autoconf 2.59 Copyright (C) 2003 Free Software Foundation, Inc. @@ -1177,7 +1177,7 @@ cat >&5 <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by libtool $as_me 1.5.8, which was +It was created by libtool $as_me 1.5.10, which was generated by GNU Autoconf 2.59. Invocation command line was $ $0 $@ @@ -1525,11 +1525,11 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu # It is assumed that we only want to see the date extension for cvs libtool # versions (i.e. "odd" letters) and not actual alpha releases. TIMESTAMP= -case 1.5.8 in +case 1.5.10 in *[acegikmoqsuwy]) TIMESTAMP=`${CONFIG_SHELL} ${srcdir}/mkstamp < ${srcdir}/ChangeLog` sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Configuring libtool 1.5.8$TIMESTAMP ## +## Configuring libtool 1.5.10$TIMESTAMP ## _ASBOX echo ;; @@ -1541,7 +1541,7 @@ esac ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1718,13 +1718,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1840,7 +1848,7 @@ fi # Define the identity of the package. PACKAGE=libtool - VERSION=1.5.8 + VERSION=1.5.10 cat >>confdefs.h <<_ACEOF @@ -1868,9 +1876,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1963,6 +1968,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3878,7 +3890,9 @@ fi -if test "x$CXX" != xno; then +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))); then HAVE_CXX_TRUE= HAVE_CXX_FALSE='#' else @@ -3980,7 +3994,7 @@ fi # Provide some information about the compiler. -echo "$as_me:3983:" \ +echo "$as_me:3997:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -4532,15 +4546,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -4658,7 +4663,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 4661 "configure"' > conftest.$ac_ext + echo '#line 4666 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5685,7 +5690,12 @@ fi done -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5915,6 +5925,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + @@ -6050,6 +6062,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6826,11 +6845,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6829: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6848: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6833: \$? = $ac_status" >&5 + echo "$as_me:6852: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -7069,11 +7088,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7072: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7091: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7076: \$? = $ac_status" >&5 + echo "$as_me:7095: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -7129,11 +7148,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7132: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7151: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:7136: \$? = $ac_status" >&5 + echo "$as_me:7155: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9314,7 +9333,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10927,6 +10948,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11605,11 +11628,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11608: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11631: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11612: \$? = $ac_status" >&5 + echo "$as_me:11635: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11665,11 +11688,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11668: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11691: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11672: \$? = $ac_status" >&5 + echo "$as_me:11695: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -13026,7 +13049,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13987: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13968: \$? = $ac_status" >&5 + echo "$as_me:13991: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -14021,11 +14044,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:14024: $lt_compile\"" >&5) + (eval echo "\"\$as_me:14047: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:14028: \$? = $ac_status" >&5 + echo "$as_me:14051: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -16060,11 +16083,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16063: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16086: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16067: \$? = $ac_status" >&5 + echo "$as_me:16090: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16303,11 +16326,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16306: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16329: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16310: \$? = $ac_status" >&5 + echo "$as_me:16333: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16363,11 +16386,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16366: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16389: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16370: \$? = $ac_status" >&5 + echo "$as_me:16393: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18548,7 +18571,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5 cat >&5 <<_CSEOF -This file was extended by libtool $as_me 1.5.8, which was +This file was extended by libtool $as_me 1.5.10, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -20171,7 +20194,7 @@ _ACEOF cat >>$CONFIG_STATUS <<_ACEOF ac_cs_version="\\ -libtool config.status 1.5.8 +libtool config.status 1.5.10 configured by $0, generated by GNU Autoconf 2.59, with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" @@ -20381,7 +20404,6 @@ s,@AUTOCONF@,$AUTOCONF,;t t s,@AUTOMAKE@,$AUTOMAKE,;t t s,@AUTOHEADER@,$AUTOHEADER,;t t s,@MAKEINFO@,$MAKEINFO,;t t -s,@AMTAR@,$AMTAR,;t t s,@install_sh@,$install_sh,;t t s,@STRIP@,$STRIP,;t t s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t @@ -20390,6 +20412,9 @@ s,@mkdir_p@,$mkdir_p,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t s,@am__leading_dot@,$am__leading_dot,;t t +s,@AMTAR@,$AMTAR,;t t +s,@am__tar@,$am__tar,;t t +s,@am__untar@,$am__untar,;t t s,@pkgdatadir@,$pkgdatadir,;t t s,@aclocaldir@,$aclocaldir,;t t s,@subdirs@,$subdirs,;t t @@ -20839,27 +20864,21 @@ echo X"$mf" | else continue fi - grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/configure.ac libtool-1.5.10/configure.ac --- libtool-1.5.8/configure.ac 2004-08-07 21:01:29.000000000 +0900 +++ libtool-1.5.10/configure.ac 2004-09-19 21:16:42.000000000 +0900 @@ -25,7 +25,7 @@ AC_PREREQ(2.50) ## ------------------------ ## ## Autoconf initialisation. ## ## ------------------------ ## -AC_INIT([libtool], [1.5.8], [bug-libtool@gnu.org]) +AC_INIT([libtool], [1.5.10], [bug-libtool@gnu.org]) AC_CONFIG_SRCDIR([ltmain.in]) @@ -104,7 +104,10 @@ AC_PROG_LN_S pushdef([AC_MSG_ERROR], [CXX=no]) AC_PROG_CXX popdef([AC_MSG_ERROR]) -AM_CONDITIONAL(HAVE_CXX, [test "x$CXX" != xno]) +AM_CONDITIONAL(HAVE_CXX, +[test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++")))]) pushdef([AC_MSG_ERROR], [F77=no]) AC_PROG_F77 diff -ruNp libtool-1.5.8/demo/Makefile.am libtool-1.5.10/demo/Makefile.am --- libtool-1.5.8/demo/Makefile.am 2002-11-19 18:42:39.000000000 +0900 +++ libtool-1.5.10/demo/Makefile.am 2004-09-19 21:04:52.000000000 +0900 @@ -7,6 +7,7 @@ EXTRA_DIST = acinclude.m4 # Build a libtool library, libhello.la for installation in libdir. lib_LTLIBRARIES = libhello.la libhello_la_SOURCES = hello.c foo.c +libhello_la_CFLAGS = $(AM_CFLAGS) libhello_la_LIBADD = $(LIBM) libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1 diff -ruNp libtool-1.5.8/demo/Makefile.in libtool-1.5.10/demo/Makefile.in --- libtool-1.5.8/demo/Makefile.in 2004-08-07 21:06:23.000000000 +0900 +++ libtool-1.5.10/demo/Makefile.in 2004-09-19 21:24:29.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -39,14 +39,16 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = hell$(EXEEXT) hell_static$(EXEEXT) $(am__EXEEXT_1) EXTRA_PROGRAMS = hell0$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \ - $(srcdir)/../config.guess $(srcdir)/../config.sub \ - $(srcdir)/../install-sh $(srcdir)/../ltmain.sh \ - $(srcdir)/../missing $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(top_srcdir)/configure + $(srcdir)/../compile $(srcdir)/../config.guess \ + $(srcdir)/../config.sub $(srcdir)/../install-sh \ + $(srcdir)/../ltmain.sh $(srcdir)/../missing \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/configure subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ @@ -55,14 +57,21 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = ARFLAGS = cru libhell0_a_AR = $(AR) $(ARFLAGS) libhell0_a_LIBADD = am_libhell0_a_OBJECTS = hello.$(OBJEXT) foo.$(OBJEXT) libhell0_a_OBJECTS = $(am_libhell0_a_OBJECTS) -am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)" +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) am_libhell1_la_OBJECTS = hell1.lo @@ -71,7 +80,7 @@ am_libhell2_la_OBJECTS = hell2.lo libhell2_la_OBJECTS = $(am_libhell2_la_OBJECTS) am__DEPENDENCIES_1 = libhello_la_DEPENDENCIES = $(am__DEPENDENCIES_1) -am_libhello_la_OBJECTS = hello.lo foo.lo +am_libhello_la_OBJECTS = libhello_la-hello.lo libhello_la-foo.lo libhello_la_OBJECTS = $(am_libhello_la_OBJECTS) @BINARY_HELLDL_TRUE@am__EXEEXT_1 = helldl$(EXEEXT) binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) @@ -96,11 +105,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libhell0_a_SOURCES) $(libhell1_la_SOURCES) \ $(libhell2_la_SOURCES) $(libhello_la_SOURCES) $(hell_SOURCES) \ @@ -201,6 +210,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -235,6 +246,7 @@ EXTRA_DIST = acinclude.m4 # Build a libtool library, libhello.la for installation in libdir. lib_LTLIBRARIES = libhello.la libhello_la_SOURCES = hello.c foo.c +libhello_la_CFLAGS = $(AM_CFLAGS) libhello_la_LIBADD = $(LIBM) libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1 include_HEADERS = foo.h @@ -265,7 +277,8 @@ hardcode_tests = hc-direct hc-libflag hc # must explicitly list the wrapper script 'hell0'. (bin_PROGRAMS # are handled seamlessly by automake rules; the extra step is only # necessary for EXTRA_PROGRAMS) -CLEANFILES = $(hardcode_tests) $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) $(EXTRA_PROGRAMS) hell0 +CLEANFILES = $(hardcode_tests) $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) \ + $(EXTRA_PROGRAMS) hell0 # Unfortunately, in order to test libtool thoroughly, we need access # to its private directory. @@ -335,7 +348,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -343,8 +356,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -438,6 +451,12 @@ distclean-compile: .c.lo: $(LTCOMPILE) -c -o $@ $< +libhello_la-hello.lo: hello.c + $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libhello_la_CFLAGS) $(CFLAGS) -c -o libhello_la-hello.lo `test -f 'hello.c' || echo '$(srcdir)/'`hello.c + +libhello_la-foo.lo: foo.c + $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libhello_la_CFLAGS) $(CFLAGS) -c -o libhello_la-foo.lo `test -f 'foo.c' || echo '$(srcdir)/'`foo.c + mostlyclean-libtool: -rm -f *.lo @@ -452,7 +471,7 @@ install-includeHEADERS: $(include_HEADER test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" @list='$(include_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ done @@ -460,7 +479,7 @@ install-includeHEADERS: $(include_HEADER uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ rm -f "$(DESTDIR)$(includedir)/$$f"; \ done @@ -549,15 +568,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -570,7 +589,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -579,11 +598,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -669,7 +688,7 @@ clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/demo/acinclude.m4 libtool-1.5.10/demo/acinclude.m4 --- libtool-1.5.8/demo/acinclude.m4 2004-08-07 21:05:47.000000000 +0900 +++ libtool-1.5.10/demo/acinclude.m4 2004-09-19 21:23:54.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/demo/aclocal.m4 libtool-1.5.10/demo/aclocal.m4 --- libtool-1.5.8/demo/aclocal.m4 2004-08-07 21:06:06.000000000 +0900 +++ libtool-1.5.10/demo/aclocal.m4 2004-09-19 21:24:12.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/demo/configure libtool-1.5.10/demo/configure --- libtool-1.5.8/demo/configure 2004-08-07 21:06:28.000000000 +0900 +++ libtool-1.5.10/demo/configure 2004-09-19 21:24:35.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC BINARY_HELLDL_TRUE BINARY_HELLDL_FALSE LIBM LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC BINARY_HELLDL_TRUE BINARY_HELLDL_FALSE LIBM LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1515,7 +1515,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1692,13 +1692,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1842,9 +1850,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1937,6 +1942,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3655,15 +3667,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -3780,7 +3783,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3783 "configure"' > conftest.$ac_ext + echo '#line 3786 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5271,7 +5274,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5501,6 +5509,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5594,7 +5604,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5597:" \ +echo "$as_me:5607:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5872,6 +5882,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6648,11 +6665,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6651: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6668: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6655: \$? = $ac_status" >&5 + echo "$as_me:6672: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6891,11 +6908,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6894: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6911: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6898: \$? = $ac_status" >&5 + echo "$as_me:6915: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6951,11 +6968,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6954: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6971: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6958: \$? = $ac_status" >&5 + echo "$as_me:6975: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9136,7 +9153,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10749,6 +10768,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11427,11 +11448,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11430: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11451: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11434: \$? = $ac_status" >&5 + echo "$as_me:11455: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11487,11 +11508,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11490: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11511: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11494: \$? = $ac_status" >&5 + echo "$as_me:11515: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12848,7 +12869,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13807: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13790: \$? = $ac_status" >&5 + echo "$as_me:13811: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13843,11 +13864,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13846: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13867: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13850: \$? = $ac_status" >&5 + echo "$as_me:13871: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15882,11 +15903,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15885: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15906: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15889: \$? = $ac_status" >&5 + echo "$as_me:15910: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16125,11 +16146,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16128: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16149: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16132: \$? = $ac_status" >&5 + echo "$as_me:16153: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16185,11 +16206,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16188: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16209: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16192: \$? = $ac_status" >&5 + echo "$as_me:16213: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18370,7 +18391,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/depdemo/Makefile.in libtool-1.5.10/depdemo/Makefile.in --- libtool-1.5.8/depdemo/Makefile.in 2004-08-07 21:06:58.000000000 +0900 +++ libtool-1.5.10/depdemo/Makefile.in 2004-09-19 21:25:15.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -36,6 +36,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = depdemo$(EXEEXT) depdemo_static$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \ @@ -51,7 +52,7 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(bindir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) @@ -68,11 +69,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(depdemo_SOURCES) $(depdemo_static_SOURCES) DIST_SOURCES = $(depdemo_SOURCES) $(depdemo_static_SOURCES) @@ -171,6 +172,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -460,15 +463,17 @@ distdir: $(DISTFILES) || exit 1; \ fi; \ done - list='$(SUBDIRS)'; for subdir in $$list; do \ + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ - || mkdir "$(distdir)/$$subdir" \ + || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="../$(top_distdir)" \ - distdir="../$(distdir)/$$subdir" \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ @@ -479,15 +484,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -500,7 +505,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -509,11 +514,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -597,7 +602,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/depdemo/acinclude.m4 libtool-1.5.10/depdemo/acinclude.m4 --- libtool-1.5.8/depdemo/acinclude.m4 2004-08-07 21:06:28.000000000 +0900 +++ libtool-1.5.10/depdemo/acinclude.m4 2004-09-19 21:24:35.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/depdemo/aclocal.m4 libtool-1.5.10/depdemo/aclocal.m4 --- libtool-1.5.8/depdemo/aclocal.m4 2004-08-07 21:06:43.000000000 +0900 +++ libtool-1.5.10/depdemo/aclocal.m4 2004-09-19 21:24:54.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/depdemo/configure libtool-1.5.10/depdemo/configure --- libtool-1.5.8/depdemo/configure 2004-08-07 21:07:06.000000000 +0900 +++ libtool-1.5.10/depdemo/configure 2004-09-19 21:25:20.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC LIBM LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC LIBM LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1515,7 +1515,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1692,13 +1692,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1842,9 +1850,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1937,6 +1942,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3544,15 +3556,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -3670,7 +3673,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3673 "configure"' > conftest.$ac_ext + echo '#line 3676 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5161,7 +5164,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5391,6 +5399,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5484,7 +5494,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5487:" \ +echo "$as_me:5497:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5762,6 +5772,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6538,11 +6555,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6541: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6558: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6545: \$? = $ac_status" >&5 + echo "$as_me:6562: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6781,11 +6798,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6784: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6801: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6788: \$? = $ac_status" >&5 + echo "$as_me:6805: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6841,11 +6858,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6844: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6861: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6848: \$? = $ac_status" >&5 + echo "$as_me:6865: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9026,7 +9043,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10639,6 +10658,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11317,11 +11338,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11320: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11341: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11324: \$? = $ac_status" >&5 + echo "$as_me:11345: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11377,11 +11398,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11380: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11401: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11384: \$? = $ac_status" >&5 + echo "$as_me:11405: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12738,7 +12759,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13697: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13680: \$? = $ac_status" >&5 + echo "$as_me:13701: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13733,11 +13754,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13736: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13757: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13740: \$? = $ac_status" >&5 + echo "$as_me:13761: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15772,11 +15793,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15775: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15796: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15779: \$? = $ac_status" >&5 + echo "$as_me:15800: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16015,11 +16036,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16018: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16039: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16022: \$? = $ac_status" >&5 + echo "$as_me:16043: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16075,11 +16096,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16078: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16099: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16082: \$? = $ac_status" >&5 + echo "$as_me:16103: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18260,7 +18281,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/depdemo/l1/Makefile.in libtool-1.5.10/depdemo/l1/Makefile.in --- libtool-1.5.8/depdemo/l1/Makefile.in 2004-08-07 21:06:59.000000000 +0900 +++ libtool-1.5.10/depdemo/l1/Makefile.in 2004-09-19 21:25:11.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -36,6 +36,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ subdir = l1 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in @@ -44,8 +45,14 @@ am__aclocal_m4_deps = $(top_srcdir)/acin $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) @@ -57,11 +64,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libl1_la_SOURCES) DIST_SOURCES = $(libl1_la_SOURCES) @@ -143,6 +150,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -214,7 +223,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -222,8 +231,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -365,7 +374,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/depdemo/l2/Makefile.in libtool-1.5.10/depdemo/l2/Makefile.in --- libtool-1.5.8/depdemo/l2/Makefile.in 2004-08-07 21:07:00.000000000 +0900 +++ libtool-1.5.10/depdemo/l2/Makefile.in 2004-09-19 21:25:12.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -36,6 +36,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ subdir = l2 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in @@ -44,8 +45,14 @@ am__aclocal_m4_deps = $(top_srcdir)/acin $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) @@ -57,11 +64,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libl2_la_SOURCES) DIST_SOURCES = $(libl2_la_SOURCES) @@ -143,6 +150,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -215,7 +224,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -223,8 +232,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -366,7 +375,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/depdemo/l3/Makefile.in libtool-1.5.10/depdemo/l3/Makefile.in --- libtool-1.5.8/depdemo/l3/Makefile.in 2004-08-07 21:07:01.000000000 +0900 +++ libtool-1.5.10/depdemo/l3/Makefile.in 2004-09-19 21:25:13.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -36,6 +36,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ subdir = l3 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in @@ -44,8 +45,14 @@ am__aclocal_m4_deps = $(top_srcdir)/acin $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) @@ -58,11 +65,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libl3_la_SOURCES) DIST_SOURCES = $(libl3_la_SOURCES) @@ -144,6 +151,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -217,7 +226,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -225,8 +234,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -368,7 +377,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/depdemo/l4/Makefile.in libtool-1.5.10/depdemo/l4/Makefile.in --- libtool-1.5.8/depdemo/l4/Makefile.in 2004-08-07 21:07:02.000000000 +0900 +++ libtool-1.5.10/depdemo/l4/Makefile.in 2004-09-19 21:25:13.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -36,6 +36,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ subdir = l4 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in @@ -44,8 +45,14 @@ am__aclocal_m4_deps = $(top_srcdir)/acin $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) @@ -59,11 +66,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libl4_la_SOURCES) DIST_SOURCES = $(libl4_la_SOURCES) @@ -145,6 +152,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -217,7 +226,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -225,8 +234,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -368,7 +377,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/doc/Makefile.in libtool-1.5.10/doc/Makefile.in --- libtool-1.5.8/doc/Makefile.in 2004-08-07 21:03:57.000000000 +0900 +++ libtool-1.5.10/doc/Makefile.in 2004-09-19 21:21:58.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -32,6 +32,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ subdir = doc DIST_COMMON = $(libtool_TEXINFOS) $(srcdir)/Makefile.am \ @@ -42,7 +43,7 @@ am__aclocal_m4_deps = $(top_srcdir)/acin $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = @@ -153,6 +154,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -229,15 +232,11 @@ distclean-libtool: -rm -f libtool .texi.info: - restore=: && \ - backupdir="$(am__leading_dot)am$$$$" && \ + restore=: && backupdir="$(am__leading_dot)am$$$$" && \ am__cwd=`pwd` && cd $(srcdir) && \ rm -rf $$backupdir && mkdir $$backupdir && \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ - if test -f $$f; then \ - mv $$f $$backupdir; \ - restore=mv; \ - fi; \ + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ cd "$$am__cwd"; \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ @@ -250,8 +249,7 @@ distclean-libtool: cd $(srcdir) && \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ - rm -rf $$backupdir; \ - exit $$rc + rm -rf $$backupdir; exit $$rc .texi.dvi: TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ @@ -264,10 +262,18 @@ distclean-libtool: $(TEXI2PDF) $< .texi.html: - $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ - -o $@ $< - if test ! -d $@ && test -d $(@:.html=); then \ - mv $(@:.html=) $@; else :; fi + rm -rf $(@:.html=.htp) + if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \ + -o $(@:.html=.htp) $<; \ + then \ + rm -rf $@; \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \ + else \ + if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \ + rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \ + exit 1; \ + fi $(srcdir)/libtool.info: libtool.texi $(srcdir)/version.texi $(libtool_TEXINFOS) libtool.dvi: libtool.texi $(srcdir)/version.texi $(libtool_TEXINFOS) libtool.pdf: libtool.texi $(srcdir)/version.texi $(libtool_TEXINFOS) @@ -405,7 +411,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/doc/libtool.info libtool-1.5.10/doc/libtool.info --- libtool-1.5.8/doc/libtool.info 2004-08-07 21:31:06.000000000 +0900 +++ libtool-1.5.10/doc/libtool.info 2004-09-19 21:36:36.000000000 +0900 @@ -11,7 +11,7 @@ START-INFO-DIR-ENTRY * libtoolize: (libtool)Invoking libtoolize. Adding libtool support. END-INFO-DIR-ENTRY - This file documents GNU Libtool 1.5.8 + This file documents GNU Libtool 1.5.10 Copyright (C) 1996-2003 Free Software Foundation, Inc. @@ -30,7 +30,7 @@ Shared library support for GNU This file documents GNU Libtool, a script that allows package developers to provide generic shared library support. This edition documents -version 1.5.8. +version 1.5.10. *Note Reporting bugs::, for information on how to report problems with libtool. @@ -2260,7 +2260,7 @@ interpreted language. In fact, dlopen c language interpreters to provide an efficient way to extend the language. - As of version 1.5.8, libtool provides support for dlopened modules. + As of version 1.5.10, libtool provides support for dlopened modules. However, you should indicate that your package is willing to use such support, by using the macro `AC_LIBTOOL_DLOPEN' in `configure.in'. If this macro is not used (or it is used _after_ `AC_PROG_LIBTOOL'), @@ -5359,90 +5359,90 @@ Index  Tag Table: -Node: Top865 -Node: Introduction6706 -Node: Motivation8528 -Node: Issues9848 -Node: Other implementations11318 -Node: Postmortem11861 -Node: Libtool paradigm13482 -Node: Using libtool14427 -Node: Creating object files16541 -Node: Linking libraries19055 -Ref: Linking libraries-Footnote-121987 -Node: Linking executables22128 -Ref: Linking executables-Footnote-127114 -Node: Debugging executables27407 -Node: Installing libraries30115 -Ref: Installing libraries-Footnote-133268 -Node: Installing executables33350 -Node: Static libraries34143 -Node: Invoking libtool37379 -Node: Compile mode40625 -Node: Link mode42953 -Node: Execute mode49682 -Node: Install mode50462 -Node: Finish mode52468 -Node: Uninstall mode52903 -Node: Clean mode53344 -Node: Integrating libtool53803 -Node: Makefile rules54486 -Node: Using Automake55562 -Node: Configuring58130 -Node: AC_PROG_LIBTOOL59304 -Ref: AC_PROG_LIBTOOL-Footnote-166636 -Node: Distributing66897 -Node: Invoking libtoolize67753 -Node: Autoconf .o macros69488 -Node: Static-only libraries70742 -Ref: Static-only libraries-Footnote-172101 -Node: Versioning72210 -Node: Interfaces73582 -Node: Libtool versioning74215 -Node: Updating version info76428 -Node: Release numbers78306 -Node: Library tips80153 -Node: C header files82962 -Ref: C header files-Footnote-186633 -Node: Inter-library dependencies86842 -Node: Dlopened modules89504 -Ref: Dlopened modules-Footnote-191416 -Node: Building modules91482 -Node: Dlpreopening92690 -Node: Finding the dlname95524 -Ref: Finding the dlname-Footnote-196823 -Node: Dlopen issues96876 -Node: Using libltdl97929 -Node: Libltdl interface99709 -Node: Modules for libltdl109864 -Node: Thread Saftey in libltdl112351 -Node: User defined module data114563 -Node: Module loaders for libltdl119386 -Ref: Module loaders for libltdl-Footnote-1128754 -Node: Distributing libltdl128860 -Ref: Distributing libltdl-Footnote-1135313 -Node: Other languages135538 -Node: C++ libraries136170 -Node: Troubleshooting137597 -Node: Libtool test suite138132 -Node: Test descriptions138865 -Node: When tests fail145316 -Node: Reporting bugs146211 -Node: Maintaining147829 -Node: New ports148572 -Node: Information sources149265 -Node: Porting inter-library dependencies151733 -Node: Tested platforms154450 -Node: Platform quirks162880 -Node: References163854 -Node: Compilers164711 -Ref: Compilers-Footnote-1166287 -Node: Reloadable objects166603 -Node: Multiple dependencies166962 -Node: Archivers167853 -Node: libtool script contents168419 -Node: Cheap tricks183655 -Node: GNU Free Documentation License185158 -Node: Index203852 +Node: Top866 +Node: Introduction6708 +Node: Motivation8530 +Node: Issues9850 +Node: Other implementations11320 +Node: Postmortem11863 +Node: Libtool paradigm13484 +Node: Using libtool14429 +Node: Creating object files16543 +Node: Linking libraries19057 +Ref: Linking libraries-Footnote-121989 +Node: Linking executables22130 +Ref: Linking executables-Footnote-127116 +Node: Debugging executables27409 +Node: Installing libraries30117 +Ref: Installing libraries-Footnote-133270 +Node: Installing executables33352 +Node: Static libraries34145 +Node: Invoking libtool37381 +Node: Compile mode40627 +Node: Link mode42955 +Node: Execute mode49684 +Node: Install mode50464 +Node: Finish mode52470 +Node: Uninstall mode52905 +Node: Clean mode53346 +Node: Integrating libtool53805 +Node: Makefile rules54488 +Node: Using Automake55564 +Node: Configuring58132 +Node: AC_PROG_LIBTOOL59306 +Ref: AC_PROG_LIBTOOL-Footnote-166638 +Node: Distributing66899 +Node: Invoking libtoolize67755 +Node: Autoconf .o macros69490 +Node: Static-only libraries70744 +Ref: Static-only libraries-Footnote-172103 +Node: Versioning72212 +Node: Interfaces73584 +Node: Libtool versioning74217 +Node: Updating version info76430 +Node: Release numbers78308 +Node: Library tips80155 +Node: C header files82964 +Ref: C header files-Footnote-186635 +Node: Inter-library dependencies86844 +Node: Dlopened modules89506 +Ref: Dlopened modules-Footnote-191419 +Node: Building modules91485 +Node: Dlpreopening92693 +Node: Finding the dlname95527 +Ref: Finding the dlname-Footnote-196826 +Node: Dlopen issues96879 +Node: Using libltdl97932 +Node: Libltdl interface99712 +Node: Modules for libltdl109867 +Node: Thread Saftey in libltdl112354 +Node: User defined module data114566 +Node: Module loaders for libltdl119389 +Ref: Module loaders for libltdl-Footnote-1128757 +Node: Distributing libltdl128863 +Ref: Distributing libltdl-Footnote-1135316 +Node: Other languages135541 +Node: C++ libraries136173 +Node: Troubleshooting137600 +Node: Libtool test suite138135 +Node: Test descriptions138868 +Node: When tests fail145319 +Node: Reporting bugs146214 +Node: Maintaining147832 +Node: New ports148575 +Node: Information sources149268 +Node: Porting inter-library dependencies151736 +Node: Tested platforms154453 +Node: Platform quirks162883 +Node: References163857 +Node: Compilers164714 +Ref: Compilers-Footnote-1166290 +Node: Reloadable objects166606 +Node: Multiple dependencies166965 +Node: Archivers167856 +Node: libtool script contents168422 +Node: Cheap tricks183658 +Node: GNU Free Documentation License185161 +Node: Index203855  End Tag Table diff -ruNp libtool-1.5.8/doc/stamp-vti libtool-1.5.10/doc/stamp-vti --- libtool-1.5.8/doc/stamp-vti 2004-08-07 21:13:56.000000000 +0900 +++ libtool-1.5.10/doc/stamp-vti 2004-09-19 21:36:35.000000000 +0900 @@ -1,4 +1,4 @@ -@set UPDATED 27 March 2004 -@set UPDATED-MONTH March 2004 -@set EDITION 1.5.8 -@set VERSION 1.5.8 +@set UPDATED 23 January 2004 +@set UPDATED-MONTH January 2004 +@set EDITION 1.5.10 +@set VERSION 1.5.10 diff -ruNp libtool-1.5.8/doc/texinfo.tex libtool-1.5.10/doc/texinfo.tex --- libtool-1.5.8/doc/texinfo.tex 2004-08-07 21:14:19.000000000 +0900 +++ libtool-1.5.10/doc/texinfo.tex 2004-09-19 21:40:53.000000000 +0900 @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2004-07-31.11} +\def\texinfoversion{2004-09-06.16} % % Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software @@ -2633,7 +2633,10 @@ where each line of input produces a line \startsavinginserts % % @item within a multitable starts a normal row. - \let\item\crcr + % We use \def instead of \let so that if one of the multitable entries + % contains an @itemize, we don't choke on the \item (seen as \crcr aka + % \endtemplate) expanding \doitemize. + \def\item{\crcr}% % \tolerance=9500 \hbadness=9500 @@ -3530,7 +3533,10 @@ width0pt\relax} \fi \removelastskip % % We like breaks before the index initials, so insert a bonus. - \penalty -300 + \nobreak + \vskip 0pt plus 3\baselineskip + \penalty 0 + \vskip 0pt plus -3\baselineskip % % Typeset the initial. Making this add up to a whole number of % baselineskips increases the chance of the dots lining up from column @@ -3540,10 +3546,9 @@ width0pt\relax} \fi % No shrink because it confuses \balancecolumns. \vskip 1.67\baselineskip plus .5\baselineskip \leftline{\secbf #1}% - \vskip .33\baselineskip plus .1\baselineskip - % % Do our best not to break after the initial. \nobreak + \vskip .33\baselineskip plus .1\baselineskip }} % \entry typesets a paragraph consisting of the text (#1), dot leaders, and @@ -5453,7 +5458,11 @@ width0pt\relax} \fi \newlinechar`\^^M \let\xeatspaces\eatspaces % Undo catcode changes of \startcontents and \doprintindex - \catcode`\@=0 \catcode`\\=\other \escapechar=`\@ + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ % ... and \example \spaceisspace % @@ -5477,13 +5486,15 @@ width0pt\relax} \fi % \do\macro1\do\macro2... % Utility routines. -% This does \let #1 = #2, except with \csnames. +% This does \let #1 = #2, with \csnames; that is, +% \let \csname#1\endcsname = \csname#2\endcsname +% (except of course we have to play expansion games). +% \def\cslet#1#2{% -\expandafter\expandafter -\expandafter\let -\expandafter\expandafter -\csname#1\endcsname -\csname#2\endcsname} + \expandafter\let + \csname#1\expandafter\endcsname + \csname#2\endcsname +} % Trim leading and trailing spaces off a string. % Concepts from aro-bend problem 15 (see CTAN). @@ -5511,14 +5522,15 @@ width0pt\relax} \fi % body, and then making it the \newlinechar in \scanmacro. \def\scanctxt{% - \catcode`\~=\other - \catcode`\^=\other - \catcode`\_=\other - \catcode`\|=\other + \catcode`\"=\other + \catcode`\+=\other \catcode`\<=\other \catcode`\>=\other - \catcode`\+=\other \catcode`\@=\other + \catcode`\^=\other + \catcode`\_=\other + \catcode`\|=\other + \catcode`\~=\other } \def\scanargctxt{% @@ -6468,6 +6480,9 @@ width0pt\relax} \fi \ifx\captionline\empty \else \vskip.5\parskip \captionline + % + % Space below caption. + \vskip\parskip \fi % % If have an xref label, write the list of floats info. Do this @@ -6478,19 +6493,22 @@ width0pt\relax} \fi % caption if specified, else the full caption if specified, else nothing. {% \atdummies \turnoffactive \otherbackslash - \immediate\write\auxfile{@xrdef{\floatlabel-lof}{% - \floatident - \ifx\thisshortcaption\empty - \ifx\thiscaption\empty \else : \thiscaption \fi - \else - : \thisshortcaption - \fi - }}% + % since we read the caption text in the macro world, where ^^M + % is turned into a normal character, we have to scan it back, so + % we don't write the literal three characters "^^M" into the aux file. + \scanexp{% + \xdef\noexpand\gtemp{% + \ifx\thisshortcaption\empty + \thiscaption + \else + \thisshortcaption + \fi + }% + }% + \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident + \ifx\gtemp\empty \else : \gtemp \fi}}% }% \fi - % - % Space below caption, if we printed anything. - \ifx\printedsomething\empty \else \vskip\parskip \fi \egroup % end of \vtop % % place the captured inserts diff -ruNp libtool-1.5.8/doc/version.texi libtool-1.5.10/doc/version.texi --- libtool-1.5.8/doc/version.texi 2004-08-07 21:13:56.000000000 +0900 +++ libtool-1.5.10/doc/version.texi 2004-09-19 21:36:35.000000000 +0900 @@ -1,4 +1,4 @@ -@set UPDATED 27 March 2004 -@set UPDATED-MONTH March 2004 -@set EDITION 1.5.8 -@set VERSION 1.5.8 +@set UPDATED 23 January 2004 +@set UPDATED-MONTH January 2004 +@set EDITION 1.5.10 +@set VERSION 1.5.10 diff -ruNp libtool-1.5.8/f77demo/Makefile.in libtool-1.5.10/f77demo/Makefile.in --- libtool-1.5.8/f77demo/Makefile.in 2004-08-07 21:10:15.000000000 +0900 +++ libtool-1.5.10/f77demo/Makefile.in 2004-09-19 21:28:56.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -38,6 +38,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = fprogram$(EXEEXT) cprogram$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \ @@ -54,7 +55,7 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = LTLIBRARIES = $(noinst_LTLIBRARIES) @@ -78,17 +79,18 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ F77COMPILE = $(F77) $(AM_FFLAGS) $(FFLAGS) -LTF77COMPILE = $(LIBTOOL) --mode=compile $(F77) $(AM_FFLAGS) $(FFLAGS) +LTF77COMPILE = $(LIBTOOL) --mode=compile --tag=F77 $(F77) $(AM_FFLAGS) \ + $(FFLAGS) F77LD = $(F77) -F77LINK = $(LIBTOOL) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +F77LINK = $(LIBTOOL) --mode=link --tag=F77 $(F77LD) $(AM_FFLAGS) \ + $(FFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libfoo_la_SOURCES) $(libmix_la_SOURCES) \ $(cprogram_SOURCES) $(fprogram_SOURCES) DIST_SOURCES = $(libfoo_la_SOURCES) $(libmix_la_SOURCES) \ @@ -175,6 +177,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -436,15 +440,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -457,7 +461,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -466,11 +470,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -553,7 +557,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/f77demo/acinclude.m4 libtool-1.5.10/f77demo/acinclude.m4 --- libtool-1.5.8/f77demo/acinclude.m4 2004-08-07 21:09:32.000000000 +0900 +++ libtool-1.5.10/f77demo/acinclude.m4 2004-09-19 21:28:07.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/f77demo/aclocal.m4 libtool-1.5.10/f77demo/aclocal.m4 --- libtool-1.5.8/f77demo/aclocal.m4 2004-08-07 21:09:47.000000000 +0900 +++ libtool-1.5.10/f77demo/aclocal.m4 2004-09-19 21:28:26.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -430,7 +425,7 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_ # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -506,7 +501,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -515,7 +509,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -758,13 +754,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -930,4 +934,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/f77demo/configure libtool-1.5.10/f77demo/configure --- libtool-1.5.8/f77demo/configure 2004-08-07 21:10:20.000000000 +0900 +++ libtool-1.5.10/f77demo/configure 2004-09-19 21:29:02.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE F77 FFLAGS ac_ct_F77 FLIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP LIBTOOL LIBTOOL_DEPS LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE F77 FFLAGS ac_ct_F77 FLIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP LIBTOOL LIBTOOL_DEPS LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1513,7 +1513,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1690,13 +1690,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1840,9 +1848,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1935,6 +1940,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3145,7 +3157,7 @@ fi # Provide some information about the compiler. -echo "$as_me:3148:" \ +echo "$as_me:3160:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -3341,7 +3353,7 @@ _ACEOF # flags. ac_save_FFLAGS=$FFLAGS FFLAGS="$FFLAGS $ac_verb" -(eval echo $as_me:3344: \"$ac_link\") >&5 +(eval echo $as_me:3356: \"$ac_link\") >&5 ac_f77_v_output=`eval $ac_link 5>&1 2>&1 | grep -v 'Driving:'` echo "$ac_f77_v_output" >&5 FFLAGS=$ac_save_FFLAGS @@ -3419,7 +3431,7 @@ _ACEOF # flags. ac_save_FFLAGS=$FFLAGS FFLAGS="$FFLAGS $ac_cv_prog_f77_v" -(eval echo $as_me:3422: \"$ac_link\") >&5 +(eval echo $as_me:3434: \"$ac_link\") >&5 ac_f77_v_output=`eval $ac_link 5>&1 2>&1 | grep -v 'Driving:'` echo "$ac_f77_v_output" >&5 FFLAGS=$ac_save_FFLAGS @@ -4620,15 +4632,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -4744,7 +4747,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 4747 "configure"' > conftest.$ac_ext + echo '#line 4750 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -6041,7 +6044,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -6271,6 +6279,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! @@ -6405,6 +6415,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -7181,11 +7198,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7184: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7201: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7188: \$? = $ac_status" >&5 + echo "$as_me:7205: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -7424,11 +7441,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7427: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7444: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:7431: \$? = $ac_status" >&5 + echo "$as_me:7448: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -7484,11 +7501,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7487: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7504: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:7491: \$? = $ac_status" >&5 + echo "$as_me:7508: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9741,7 +9758,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -11370,6 +11389,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -12048,11 +12069,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12051: $lt_compile\"" >&5) + (eval echo "\"\$as_me:12072: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:12055: \$? = $ac_status" >&5 + echo "$as_me:12076: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -12108,11 +12129,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:12111: $lt_compile\"" >&5) + (eval echo "\"\$as_me:12132: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:12115: \$? = $ac_status" >&5 + echo "$as_me:12136: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -13525,7 +13546,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:14484: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:14467: \$? = $ac_status" >&5 + echo "$as_me:14488: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -14520,11 +14541,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:14523: $lt_compile\"" >&5) + (eval echo "\"\$as_me:14544: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:14527: \$? = $ac_status" >&5 + echo "$as_me:14548: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -16559,11 +16580,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16562: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16583: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16566: \$? = $ac_status" >&5 + echo "$as_me:16587: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16802,11 +16823,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16805: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16826: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16809: \$? = $ac_status" >&5 + echo "$as_me:16830: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16862,11 +16883,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16865: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16886: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16869: \$? = $ac_status" >&5 + echo "$as_me:16890: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -19119,7 +19140,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/install-sh libtool-1.5.10/install-sh --- libtool-1.5.8/install-sh 2004-03-07 00:30:41.000000000 +0900 +++ libtool-1.5.10/install-sh 2004-09-19 21:20:57.000000000 +0900 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2003-09-24.23 +scriptversion=2004-07-05.00 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -58,9 +58,6 @@ stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" -transformbasename= -transform_arg= -instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= @@ -70,22 +67,27 @@ mvcmd="$mvprog" src= dst= dir_arg= +dstarg= +no_target_directory= -usage="Usage: $0 [OPTION]... SRCFILE DSTFILE - or: $0 -d DIR1 DIR2... - -In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default. -In the second, create the directory path DIR. +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. Options: --b=TRANSFORMBASENAME --c copy source (using $cpprog) instead of moving (using $mvprog). +-c (ignored) -d create directories instead of installing files. --g GROUP $chgrp installed files to GROUP. --m MODE $chmod installed files to MODE. --o USER $chown installed files to USER. --s strip installed files (using $stripprog). --t=TRANSFORM +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. --help display this help and exit. --version display version info and exit. @@ -95,12 +97,7 @@ Environment variables override the defau while test -n "$1"; do case $1 in - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - -c) instcmd=$cpprog - shift + -c) shift continue;; -d) dir_arg=true @@ -128,159 +125,189 @@ while test -n "$1"; do shift continue;; - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; --version) echo "$0 $scriptversion"; exit 0;; - *) if test -z "$src"; then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; esac done -if test -z "$src"; then - echo "$0: no input file specified." >&2 - exit 1 -fi - -# Protect names starting with `-'. -case $src in - -*) src=./$src ;; -esac - -if test -n "$dir_arg"; then - dst=$src - src= - - if test -d "$dst"; then - instcmd=: - chmodcmd= - else - instcmd=$mkdirprog - fi -else - # Waiting for this to be detected by the "$instcmd $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst"; then - echo "$0: no destination specified." >&2 +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 exit 1 fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi +for src +do # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; + case $src in + -*) src=./$src ;; esac - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - dst=$dst/`basename "$src"` + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi fi -fi -# This sed command emulates the dirname command. -dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` -# Make sure that the destination directory exists. + # Make sure that the destination directory exists. -# Skip lots of stat calls in the usual case. -if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - IFS=$oIFS - - pathcomp= - - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 - shift - test -d "$pathcomp" || $mkdirprog "$pathcomp" - pathcomp=$pathcomp/ - done -fi + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } -if test -n "$dir_arg"; then - $doit $instcmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - -else - # If we're going to rename the final executable, determine the name now. - if test -z "$transformarg"; then - dstfile=`basename "$dst"` else - dstfile=`basename "$dst" $transformbasename \ - | sed $transformarg`$transformbasename - fi + dstfile=`basename "$dst"` - # don't allow the sed command to completely eliminate the filename. - test -z "$dstfile" && dstfile=`basename "$dst"` + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 - trap '(exit $?); exit' 1 2 13 15 - - # Move or copy the file name to the temp name - $doit $instcmd "$src" "$dsttmp" && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $instcmd $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now remove or move aside any old file at destination location. We - # try this two ways since rm can't unlink itself on some systems and - # the destination file might be busy for other reasons. In this case, - # the final cleanup might fail but the new file should still install - # successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" -fi && + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit; } +done # The final little trick to "correctly" pass the exit status to the exit trap. { diff -ruNp libtool-1.5.8/libltdl/Makefile.in libtool-1.5.10/libltdl/Makefile.in --- libtool-1.5.8/libltdl/Makefile.in 2004-08-07 21:05:01.000000000 +0900 +++ libtool-1.5.10/libltdl/Makefile.in 2004-09-19 21:23:03.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -37,6 +37,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ DIST_COMMON = README $(am__configure_deps) $(am__include_HEADERS_DIST) \ $(am__noinst_HEADERS_DIST) $(srcdir)/Makefile.am \ @@ -51,9 +52,15 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES) @@ -61,19 +68,21 @@ am__DEPENDENCIES_1 = libltdl_la_DEPENDENCIES = $(am__DEPENDENCIES_1) am_libltdl_la_OBJECTS = ltdl.lo libltdl_la_OBJECTS = $(am_libltdl_la_OBJECTS) +@INSTALL_LTDL_TRUE@am_libltdl_la_rpath = -rpath $(libdir) libltdlc_la_DEPENDENCIES = $(am__DEPENDENCIES_1) am_libltdlc_la_OBJECTS = ltdl.lo libltdlc_la_OBJECTS = $(am_libltdlc_la_OBJECTS) +@CONVENIENCE_LTDL_TRUE@am_libltdlc_la_rpath = DEFAULT_INCLUDES = -I. -I$(srcdir) -I. depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libltdl_la_SOURCES) $(libltdlc_la_SOURCES) DIST_SOURCES = $(libltdl_la_SOURCES) $(libltdlc_la_SOURCES) @@ -172,6 +181,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -271,7 +282,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -279,8 +290,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -303,9 +314,9 @@ clean-noinstLTLIBRARIES: rm -f "$${dir}/so_locations"; \ done libltdl.la: $(libltdl_la_OBJECTS) $(libltdl_la_DEPENDENCIES) - $(LINK) -rpath $(libdir) $(libltdl_la_LDFLAGS) $(libltdl_la_OBJECTS) $(libltdl_la_LIBADD) $(LIBS) + $(LINK) $(am_libltdl_la_rpath) $(libltdl_la_LDFLAGS) $(libltdl_la_OBJECTS) $(libltdl_la_LIBADD) $(LIBS) libltdlc.la: $(libltdlc_la_OBJECTS) $(libltdlc_la_DEPENDENCIES) - $(LINK) $(libltdlc_la_LDFLAGS) $(libltdlc_la_OBJECTS) $(libltdlc_la_LIBADD) $(LIBS) + $(LINK) $(am_libltdlc_la_rpath) $(libltdlc_la_LDFLAGS) $(libltdlc_la_OBJECTS) $(libltdlc_la_LIBADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) @@ -336,7 +347,7 @@ install-includeHEADERS: $(include_HEADER test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" @list='$(include_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ done @@ -344,7 +355,7 @@ install-includeHEADERS: $(include_HEADER uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ rm -f "$(DESTDIR)$(includedir)/$$f"; \ done @@ -432,15 +443,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -453,7 +464,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -462,11 +473,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -550,7 +561,7 @@ clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/libltdl/acinclude.m4 libtool-1.5.10/libltdl/acinclude.m4 --- libtool-1.5.8/libltdl/acinclude.m4 2004-08-07 21:04:03.000000000 +0900 +++ libtool-1.5.10/libltdl/acinclude.m4 2004-09-19 21:22:04.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/libltdl/aclocal.m4 libtool-1.5.10/libltdl/aclocal.m4 --- libtool-1.5.8/libltdl/aclocal.m4 2004-08-07 21:04:28.000000000 +0900 +++ libtool-1.5.10/libltdl/aclocal.m4 2004-09-19 21:22:23.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -430,7 +425,7 @@ AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_ # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -506,7 +501,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -515,7 +509,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -758,13 +754,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -930,4 +934,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/libltdl/config.guess libtool-1.5.10/libltdl/config.guess --- libtool-1.5.8/libltdl/config.guess 2004-08-07 21:14:18.000000000 +0900 +++ libtool-1.5.10/libltdl/config.guess 2004-09-19 21:40:53.000000000 +0900 @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. -timestamp='2004-07-19' +timestamp='2004-09-07' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -203,9 +203,6 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; cats:OpenBSD:*:*) echo arm-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -230,18 +227,12 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:$ mvmeppc:OpenBSD:*:*) echo powerpc-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; sgi:OpenBSD:*:*) - echo mipseb-unknown-openbsd${UNAME_RELEASE} + echo mips64-unknown-openbsd${UNAME_RELEASE} exit 0 ;; sun3:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -833,6 +824,12 @@ EOF cris:Linux:*:*) echo cris-axis-linux-gnu exit 0 ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit 0 ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit 0 ;; ia64:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; @@ -1179,9 +1176,10 @@ EOF echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; *:Darwin:*:*) - case `uname -p` in + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in *86) UNAME_PROCESSOR=i686 ;; - powerpc) UNAME_PROCESSOR=powerpc ;; + unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} exit 0 ;; diff -ruNp libtool-1.5.8/libltdl/config.sub libtool-1.5.10/libltdl/config.sub --- libtool-1.5.8/libltdl/config.sub 2004-08-07 21:14:19.000000000 +0900 +++ libtool-1.5.10/libltdl/config.sub 2004-09-19 21:40:53.000000000 +0900 @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. -timestamp='2004-06-24' +timestamp='2004-08-29' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -457,6 +457,9 @@ case $basic_machine in crds | unos) basic_machine=m68k-crds ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; cris | cris-* | etrax*) basic_machine=cris-axis ;; diff -ruNp libtool-1.5.8/libltdl/configure libtool-1.5.10/libltdl/configure --- libtool-1.5.8/libltdl/configure 2004-08-07 21:05:09.000000000 +0900 +++ libtool-1.5.10/libltdl/configure 2004-09-19 21:23:09.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS INSTALL_LTDL_TRUE INSTALL_LTDL_FALSE CONVENIENCE_LTDL_TRUE CONVENIENCE_LTDL_FALSE LIBADD_DL LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS INSTALL_LTDL_TRUE INSTALL_LTDL_FALSE CONVENIENCE_LTDL_TRUE CONVENIENCE_LTDL_FALSE LIBADD_DL LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1563,7 +1563,7 @@ fi ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -1715,13 +1715,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1856,9 +1864,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1951,6 +1956,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3739,15 +3751,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -3865,7 +3868,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3868 "configure"' > conftest.$ac_ext + echo '#line 3871 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5356,7 +5359,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5586,6 +5594,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5679,7 +5689,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5682:" \ +echo "$as_me:5692:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5957,6 +5967,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6733,11 +6750,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6736: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6753: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6740: \$? = $ac_status" >&5 + echo "$as_me:6757: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6976,11 +6993,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6979: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6996: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6983: \$? = $ac_status" >&5 + echo "$as_me:7000: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -7036,11 +7053,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:7039: $lt_compile\"" >&5) + (eval echo "\"\$as_me:7056: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:7043: \$? = $ac_status" >&5 + echo "$as_me:7060: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9221,7 +9238,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10834,6 +10853,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11512,11 +11533,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11515: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11536: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11519: \$? = $ac_status" >&5 + echo "$as_me:11540: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11572,11 +11593,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11575: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11596: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11579: \$? = $ac_status" >&5 + echo "$as_me:11600: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12933,7 +12954,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13892: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13875: \$? = $ac_status" >&5 + echo "$as_me:13896: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13928,11 +13949,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13931: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13952: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13935: \$? = $ac_status" >&5 + echo "$as_me:13956: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15967,11 +15988,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15970: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15991: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15974: \$? = $ac_status" >&5 + echo "$as_me:15995: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16210,11 +16231,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16213: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16234: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16217: \$? = $ac_status" >&5 + echo "$as_me:16238: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16270,11 +16291,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16273: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16294: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16277: \$? = $ac_status" >&5 + echo "$as_me:16298: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18455,7 +18476,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/libltdl/install-sh libtool-1.5.10/libltdl/install-sh --- libtool-1.5.8/libltdl/install-sh 2004-03-07 00:31:50.000000000 +0900 +++ libtool-1.5.10/libltdl/install-sh 2004-09-19 21:23:02.000000000 +0900 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2003-09-24.23 +scriptversion=2004-07-05.00 # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -58,9 +58,6 @@ stripprog="${STRIPPROG-strip}" rmprog="${RMPROG-rm}" mkdirprog="${MKDIRPROG-mkdir}" -transformbasename= -transform_arg= -instcmd="$mvprog" chmodcmd="$chmodprog 0755" chowncmd= chgrpcmd= @@ -70,22 +67,27 @@ mvcmd="$mvprog" src= dst= dir_arg= +dstarg= +no_target_directory= -usage="Usage: $0 [OPTION]... SRCFILE DSTFILE - or: $0 -d DIR1 DIR2... - -In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default. -In the second, create the directory path DIR. +usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... + +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. Options: --b=TRANSFORMBASENAME --c copy source (using $cpprog) instead of moving (using $mvprog). +-c (ignored) -d create directories instead of installing files. --g GROUP $chgrp installed files to GROUP. --m MODE $chmod installed files to MODE. --o USER $chown installed files to USER. --s strip installed files (using $stripprog). --t=TRANSFORM +-g GROUP $chgrpprog installed files to GROUP. +-m MODE $chmodprog installed files to MODE. +-o USER $chownprog installed files to USER. +-s $stripprog installed files. +-t DIRECTORY install into DIRECTORY. +-T report an error if DSTFILE is a directory. --help display this help and exit. --version display version info and exit. @@ -95,12 +97,7 @@ Environment variables override the defau while test -n "$1"; do case $1 in - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - -c) instcmd=$cpprog - shift + -c) shift continue;; -d) dir_arg=true @@ -128,159 +125,189 @@ while test -n "$1"; do shift continue;; - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; + -t) dstarg=$2 + shift + shift + continue;; + + -T) no_target_directory=true + shift + continue;; --version) echo "$0 $scriptversion"; exit 0;; - *) if test -z "$src"; then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; + *) # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + test -n "$dir_arg$dstarg" && break + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dstarg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dstarg" + shift # fnord + fi + shift # arg + dstarg=$arg + done + break;; esac done -if test -z "$src"; then - echo "$0: no input file specified." >&2 - exit 1 -fi - -# Protect names starting with `-'. -case $src in - -*) src=./$src ;; -esac - -if test -n "$dir_arg"; then - dst=$src - src= - - if test -d "$dst"; then - instcmd=: - chmodcmd= - else - instcmd=$mkdirprog - fi -else - # Waiting for this to be detected by the "$instcmd $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst"; then - echo "$0: no destination specified." >&2 +if test -z "$1"; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 exit 1 fi + # It's OK to call `install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi +for src +do # Protect names starting with `-'. - case $dst in - -*) dst=./$dst ;; + case $src in + -*) src=./$src ;; esac - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - dst=$dst/`basename "$src"` + if test -n "$dir_arg"; then + dst=$src + src= + + if test -d "$dst"; then + mkdircmd=: + chmodcmd= + else + mkdircmd=$mkdirprog + fi + else + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dstarg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + + dst=$dstarg + # Protect names starting with `-'. + case $dst in + -*) dst=./$dst ;; + esac + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test -n "$no_target_directory"; then + echo "$0: $dstarg: Is a directory" >&2 + exit 1 + fi + dst=$dst/`basename "$src"` + fi fi -fi -# This sed command emulates the dirname command. -dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` + # This sed command emulates the dirname command. + dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` -# Make sure that the destination directory exists. + # Make sure that the destination directory exists. -# Skip lots of stat calls in the usual case. -if test ! -d "$dstdir"; then - defaultIFS=' - ' - IFS="${IFS-$defaultIFS}" - - oIFS=$IFS - # Some sh's can't handle IFS=/ for some reason. - IFS='%' - set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` - IFS=$oIFS - - pathcomp= - - while test $# -ne 0 ; do - pathcomp=$pathcomp$1 - shift - test -d "$pathcomp" || $mkdirprog "$pathcomp" - pathcomp=$pathcomp/ - done -fi + # Skip lots of stat calls in the usual case. + if test ! -d "$dstdir"; then + defaultIFS=' + ' + IFS="${IFS-$defaultIFS}" + + oIFS=$IFS + # Some sh's can't handle IFS=/ for some reason. + IFS='%' + set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` + IFS=$oIFS + + pathcomp= + + while test $# -ne 0 ; do + pathcomp=$pathcomp$1 + shift + if test ! -d "$pathcomp"; then + $mkdirprog "$pathcomp" + # mkdir can fail with a `File exist' error in case several + # install-sh are creating the directory concurrently. This + # is OK. + test -d "$pathcomp" || exit + fi + pathcomp=$pathcomp/ + done + fi + + if test -n "$dir_arg"; then + $doit $mkdircmd "$dst" \ + && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } -if test -n "$dir_arg"; then - $doit $instcmd "$dst" \ - && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; } - -else - # If we're going to rename the final executable, determine the name now. - if test -z "$transformarg"; then - dstfile=`basename "$dst"` else - dstfile=`basename "$dst" $transformbasename \ - | sed $transformarg`$transformbasename - fi + dstfile=`basename "$dst"` - # don't allow the sed command to completely eliminate the filename. - test -z "$dstfile" && dstfile=`basename "$dst"` + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 + + # Copy the file name to the temp name. + $doit $cpprog "$src" "$dsttmp" && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ + && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ + && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ + && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 - trap '(exit $?); exit' 1 2 13 15 - - # Move or copy the file name to the temp name - $doit $instcmd "$src" "$dsttmp" && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $instcmd $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \ - && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \ - && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \ - && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } && - - # Now remove or move aside any old file at destination location. We - # try this two ways since rm can't unlink itself on some systems and - # the destination file might be busy for other reasons. In this case, - # the final cleanup might fail but the new file should still install - # successfully. - { - if test -f "$dstdir/$dstfile"; then - $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ - || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + # Now rename the file to the real destination. + { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \ || { - echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 - (exit 1); exit - } - else - : - fi - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" -fi && + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + if test -f "$dstdir/$dstfile"; then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \ + || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \ + || { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" + } + } + fi || { (exit 1); exit; } +done # The final little trick to "correctly" pass the exit status to the exit trap. { diff -ruNp libtool-1.5.8/libltdl/ltdl.c libtool-1.5.10/libltdl/ltdl.c --- libtool-1.5.8/libltdl/ltdl.c 2004-07-06 23:41:24.000000000 +0900 +++ libtool-1.5.10/libltdl/ltdl.c 2004-09-13 21:56:00.000000000 +0900 @@ -1,5 +1,5 @@ /* ltdl.c -- system independent dlopen wrapper - Copyright (C) 1998, 1999, 2000 Free Software Foundation, Inc. + Copyright (C) 1998, 1999, 2000, 2004 Free Software Foundation, Inc. Originally by Thomas Tanner This file is part of GNU Libtool. @@ -385,11 +385,13 @@ memcpy (dest, src, size) const lt_ptr src; size_t size; { - size_t i = 0; + const char * s = src; + char * d = dest; + size_t i = 0; for (i = 0; i < size; ++i) { - dest[i] = src[i]; + d[i] = s[i]; } return dest; @@ -409,17 +411,21 @@ memmove (dest, src, size) const lt_ptr src; size_t size; { - size_t i; + const char * s = src; + char * d = dest; + size_t i; - if (dest < src) + if (d < s) for (i = 0; i < size; ++i) { - dest[i] = src[i]; + d[i] = s[i]; } - else if (dest > src) - for (i = size -1; i >= 0; --i) + else if (d > s && size > 0) + for (i = size -1; ; --i) { - dest[i] = src[i]; + d[i] = s[i]; + if (i == 0) + break; } return dest; diff -ruNp libtool-1.5.8/libltdl/ltmain.sh libtool-1.5.10/libltdl/ltmain.sh --- libtool-1.5.8/libltdl/ltmain.sh 2004-08-07 21:12:06.000000000 +0900 +++ libtool-1.5.10/libltdl/ltmain.sh 2004-09-19 21:34:44.000000000 +0900 @@ -43,8 +43,8 @@ EXIT_FAILURE=1 PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.5.8 -TIMESTAMP=" (1.1220.2.117 2004/08/04 14:12:05)" +VERSION=1.5.10 +TIMESTAMP=" (1.1220.2.130 2004/09/19 12:13:49)" # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. diff -ruNp libtool-1.5.8/libtool.m4 libtool-1.5.10/libtool.m4 --- libtool-1.5.8/libtool.m4 2004-08-04 21:35:27.000000000 +0900 +++ libtool-1.5.10/libtool.m4 2004-09-19 21:15:08.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/ltmain.sh libtool-1.5.10/ltmain.sh --- libtool-1.5.8/ltmain.sh 2004-08-07 21:12:06.000000000 +0900 +++ libtool-1.5.10/ltmain.sh 2004-09-19 21:34:44.000000000 +0900 @@ -43,8 +43,8 @@ EXIT_FAILURE=1 PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.5.8 -TIMESTAMP=" (1.1220.2.117 2004/08/04 14:12:05)" +VERSION=1.5.10 +TIMESTAMP=" (1.1220.2.130 2004/09/19 12:13:49)" # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. diff -ruNp libtool-1.5.8/mdemo/Makefile.in libtool-1.5.10/mdemo/Makefile.in --- libtool-1.5.8/mdemo/Makefile.in 2004-08-07 21:07:40.000000000 +0900 +++ libtool-1.5.10/mdemo/Makefile.in 2004-09-19 21:25:56.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -38,6 +38,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = mdemo$(EXEEXT) mdemo_static$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \ @@ -53,8 +54,14 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) @@ -84,11 +91,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(foo1_la_SOURCES) $(libfoo2_la_SOURCES) \ $(libmlib_la_SOURCES) $(libsub_la_SOURCES) $(mdemo_SOURCES) \ @@ -187,6 +194,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -288,7 +297,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -296,8 +305,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -462,15 +471,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -483,7 +492,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -492,11 +501,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -581,7 +590,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/mdemo/acinclude.m4 libtool-1.5.10/mdemo/acinclude.m4 --- libtool-1.5.8/mdemo/acinclude.m4 2004-08-07 21:07:06.000000000 +0900 +++ libtool-1.5.10/mdemo/acinclude.m4 2004-09-19 21:25:20.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/mdemo/aclocal.m4 libtool-1.5.10/mdemo/aclocal.m4 --- libtool-1.5.8/mdemo/aclocal.m4 2004-08-07 21:07:22.000000000 +0900 +++ libtool-1.5.10/mdemo/aclocal.m4 2004-09-19 21:25:39.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/mdemo/configure libtool-1.5.10/mdemo/configure --- libtool-1.5.8/mdemo/configure 2004-08-07 21:07:45.000000000 +0900 +++ libtool-1.5.10/mdemo/configure 2004-09-19 21:26:02.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE INCLTDL LIBLTDL build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC LIBM LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE INCLTDL LIBLTDL build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC LIBM LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1515,7 +1515,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1692,13 +1692,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1842,9 +1850,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1937,6 +1942,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3669,15 +3681,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -3795,7 +3798,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3798 "configure"' > conftest.$ac_ext + echo '#line 3801 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5286,7 +5289,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5516,6 +5524,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5609,7 +5619,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5612:" \ +echo "$as_me:5622:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5887,6 +5897,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6663,11 +6680,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6666: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6683: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6670: \$? = $ac_status" >&5 + echo "$as_me:6687: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6906,11 +6923,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6909: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6926: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6913: \$? = $ac_status" >&5 + echo "$as_me:6930: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6966,11 +6983,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6969: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6986: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6973: \$? = $ac_status" >&5 + echo "$as_me:6990: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -9151,7 +9168,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10764,6 +10783,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11442,11 +11463,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11445: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11466: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11449: \$? = $ac_status" >&5 + echo "$as_me:11470: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11502,11 +11523,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11505: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11526: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11509: \$? = $ac_status" >&5 + echo "$as_me:11530: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12863,7 +12884,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13822: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13805: \$? = $ac_status" >&5 + echo "$as_me:13826: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13858,11 +13879,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13861: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13882: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13865: \$? = $ac_status" >&5 + echo "$as_me:13886: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15897,11 +15918,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15900: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15921: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15904: \$? = $ac_status" >&5 + echo "$as_me:15925: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16140,11 +16161,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16143: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16164: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:16147: \$? = $ac_status" >&5 + echo "$as_me:16168: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -16200,11 +16221,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:16203: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16224: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:16207: \$? = $ac_status" >&5 + echo "$as_me:16228: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18385,7 +18406,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/mdemo2/Makefile.in libtool-1.5.10/mdemo2/Makefile.in --- libtool-1.5.8/mdemo2/Makefile.in 2004-08-07 21:08:14.000000000 +0900 +++ libtool-1.5.10/mdemo2/Makefile.in 2004-09-19 21:26:38.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -36,6 +36,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = mdemo2$(EXEEXT) mdemo2_static$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \ @@ -51,7 +52,7 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = am__installdirs = "$(DESTDIR)$(bindir)" binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) @@ -68,11 +69,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(mdemo2_SOURCES) $(mdemo2_static_SOURCES) DIST_SOURCES = $(mdemo2_SOURCES) $(mdemo2_static_SOURCES) @@ -157,6 +158,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -380,15 +383,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -401,7 +404,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -410,11 +413,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -497,7 +500,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/mdemo2/acinclude.m4 libtool-1.5.10/mdemo2/acinclude.m4 --- libtool-1.5.8/mdemo2/acinclude.m4 2004-08-07 21:07:45.000000000 +0900 +++ libtool-1.5.10/mdemo2/acinclude.m4 2004-09-19 21:26:02.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/mdemo2/aclocal.m4 libtool-1.5.10/mdemo2/aclocal.m4 --- libtool-1.5.8/mdemo2/aclocal.m4 2004-08-07 21:07:59.000000000 +0900 +++ libtool-1.5.10/mdemo2/aclocal.m4 2004-09-19 21:26:21.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/mdemo2/configure libtool-1.5.10/mdemo2/configure --- libtool-1.5.8/mdemo2/configure 2004-08-07 21:08:19.000000000 +0900 +++ libtool-1.5.10/mdemo2/configure 2004-09-19 21:26:44.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1515,7 +1515,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1692,13 +1692,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1842,9 +1850,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1937,6 +1942,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3652,15 +3664,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -3778,7 +3781,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3781 "configure"' > conftest.$ac_ext + echo '#line 3784 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5027,7 +5030,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5257,6 +5265,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5350,7 +5360,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5353:" \ +echo "$as_me:5363:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5628,6 +5638,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6404,11 +6421,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6407: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6424: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6411: \$? = $ac_status" >&5 + echo "$as_me:6428: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6647,11 +6664,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6650: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6667: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6654: \$? = $ac_status" >&5 + echo "$as_me:6671: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6707,11 +6724,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6710: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6727: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6714: \$? = $ac_status" >&5 + echo "$as_me:6731: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8892,7 +8909,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10505,6 +10524,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11183,11 +11204,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11186: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11207: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11190: \$? = $ac_status" >&5 + echo "$as_me:11211: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11243,11 +11264,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11246: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11267: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11250: \$? = $ac_status" >&5 + echo "$as_me:11271: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12604,7 +12625,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13563: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13546: \$? = $ac_status" >&5 + echo "$as_me:13567: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13599,11 +13620,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13602: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13623: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13606: \$? = $ac_status" >&5 + echo "$as_me:13627: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15638,11 +15659,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15641: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15662: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15645: \$? = $ac_status" >&5 + echo "$as_me:15666: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15881,11 +15902,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15884: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15905: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15888: \$? = $ac_status" >&5 + echo "$as_me:15909: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15941,11 +15962,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15944: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15965: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:15948: \$? = $ac_status" >&5 + echo "$as_me:15969: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18126,7 +18147,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/pdemo/Makefile.am libtool-1.5.10/pdemo/Makefile.am --- libtool-1.5.8/pdemo/Makefile.am 2002-11-19 18:42:39.000000000 +0900 +++ libtool-1.5.10/pdemo/Makefile.am 2004-09-19 21:04:52.000000000 +0900 @@ -7,6 +7,7 @@ EXTRA_DIST = acinclude.m4 # Build a libtool library, libhello.la for installation in libdir. lib_LTLIBRARIES = libhello.la libhello_la_SOURCES = longer_file_name_hello.c longer_file_name_foo.c longer_file_name_foo2.c +libhello_la_CFLAGS = $(AM_CFLAGS) libhello_la_LIBADD = $(LIBM) libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1 diff -ruNp libtool-1.5.8/pdemo/Makefile.in libtool-1.5.10/pdemo/Makefile.in --- libtool-1.5.8/pdemo/Makefile.in 2004-08-07 21:08:49.000000000 +0900 +++ libtool-1.5.10/pdemo/Makefile.in 2004-09-19 21:27:20.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -39,14 +39,16 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ bin_PROGRAMS = hell$(EXEEXT) hell_static$(EXEEXT) $(am__EXEEXT_1) EXTRA_PROGRAMS = hell0$(EXEEXT) DIST_COMMON = $(am__configure_deps) $(include_HEADERS) \ - $(srcdir)/../config.guess $(srcdir)/../config.sub \ - $(srcdir)/../install-sh $(srcdir)/../ltmain.sh \ - $(srcdir)/../missing $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in $(top_srcdir)/configure + $(srcdir)/../compile $(srcdir)/../config.guess \ + $(srcdir)/../config.sub $(srcdir)/../install-sh \ + $(srcdir)/../ltmain.sh $(srcdir)/../missing \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ + $(top_srcdir)/configure subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ @@ -55,7 +57,7 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = ARFLAGS = cru libhell0_a_AR = $(AR) $(ARFLAGS) @@ -63,7 +65,14 @@ libhell0_a_LIBADD = am_libhell0_a_OBJECTS = longer_file_name_hello.$(OBJEXT) \ longer_file_name_foo.$(OBJEXT) libhell0_a_OBJECTS = $(am_libhell0_a_OBJECTS) -am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)" +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; +am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \ + "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) am_libhell1_la_OBJECTS = longer_file_name_hell1.lo @@ -72,8 +81,9 @@ am_libhell2_la_OBJECTS = longer_file_nam libhell2_la_OBJECTS = $(am_libhell2_la_OBJECTS) am__DEPENDENCIES_1 = libhello_la_DEPENDENCIES = $(am__DEPENDENCIES_1) -am_libhello_la_OBJECTS = longer_file_name_hello.lo \ - longer_file_name_foo.lo longer_file_name_foo2.lo +am_libhello_la_OBJECTS = libhello_la-longer_file_name_hello.lo \ + libhello_la-longer_file_name_foo.lo \ + libhello_la-longer_file_name_foo2.lo libhello_la_OBJECTS = $(am_libhello_la_OBJECTS) @BINARY_HELLDL_TRUE@am__EXEEXT_1 = helldl$(EXEEXT) binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) @@ -99,11 +109,11 @@ depcomp = am__depfiles_maybe = COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \ +LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) -LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ +LINK = $(LIBTOOL) --mode=link --tag=CC $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libhell0_a_SOURCES) $(libhell1_la_SOURCES) \ $(libhell2_la_SOURCES) $(libhello_la_SOURCES) $(hell_SOURCES) \ @@ -198,6 +208,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -232,6 +244,7 @@ EXTRA_DIST = acinclude.m4 # Build a libtool library, libhello.la for installation in libdir. lib_LTLIBRARIES = libhello.la libhello_la_SOURCES = longer_file_name_hello.c longer_file_name_foo.c longer_file_name_foo2.c +libhello_la_CFLAGS = $(AM_CFLAGS) libhello_la_LIBADD = $(LIBM) libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1 include_HEADERS = foo.h @@ -262,7 +275,8 @@ hardcode_tests = hc-direct hc-libflag hc # must explicitly list the wrapper script 'hell0'. (bin_PROGRAMS # are handled seamlessly by automake rules; the extra step is only # necessary for EXTRA_PROGRAMS) -CLEANFILES = $(hardcode_tests) $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) $(EXTRA_PROGRAMS) hell0 +CLEANFILES = $(hardcode_tests) $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) \ + $(EXTRA_PROGRAMS) hell0 # Unfortunately, in order to test libtool thoroughly, we need access # to its private directory. @@ -332,7 +346,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -340,8 +354,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -435,6 +449,15 @@ distclean-compile: .c.lo: $(LTCOMPILE) -c -o $@ $< +libhello_la-longer_file_name_hello.lo: longer_file_name_hello.c + $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libhello_la_CFLAGS) $(CFLAGS) -c -o libhello_la-longer_file_name_hello.lo `test -f 'longer_file_name_hello.c' || echo '$(srcdir)/'`longer_file_name_hello.c + +libhello_la-longer_file_name_foo.lo: longer_file_name_foo.c + $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libhello_la_CFLAGS) $(CFLAGS) -c -o libhello_la-longer_file_name_foo.lo `test -f 'longer_file_name_foo.c' || echo '$(srcdir)/'`longer_file_name_foo.c + +libhello_la-longer_file_name_foo2.lo: longer_file_name_foo2.c + $(LIBTOOL) --mode=compile --tag=CC $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libhello_la_CFLAGS) $(CFLAGS) -c -o libhello_la-longer_file_name_foo2.lo `test -f 'longer_file_name_foo2.c' || echo '$(srcdir)/'`longer_file_name_foo2.c + mostlyclean-libtool: -rm -f *.lo @@ -449,7 +472,7 @@ install-includeHEADERS: $(include_HEADER test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" @list='$(include_HEADERS)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ done @@ -457,7 +480,7 @@ install-includeHEADERS: $(include_HEADER uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; for p in $$list; do \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ rm -f "$(DESTDIR)$(includedir)/$$f"; \ done @@ -546,15 +569,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -567,7 +590,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -576,11 +599,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -666,7 +689,7 @@ clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/pdemo/acinclude.m4 libtool-1.5.10/pdemo/acinclude.m4 --- libtool-1.5.8/pdemo/acinclude.m4 2004-08-07 21:08:19.000000000 +0900 +++ libtool-1.5.10/pdemo/acinclude.m4 2004-09-19 21:26:44.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/pdemo/aclocal.m4 libtool-1.5.10/pdemo/aclocal.m4 --- libtool-1.5.8/pdemo/aclocal.m4 2004-08-07 21:08:34.000000000 +0900 +++ libtool-1.5.10/pdemo/aclocal.m4 2004-09-19 21:27:03.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/pdemo/configure libtool-1.5.10/pdemo/configure --- libtool-1.5.8/pdemo/configure 2004-08-07 21:08:54.000000000 +0900 +++ libtool-1.5.10/pdemo/configure 2004-09-19 21:27:26.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC BINARY_HELLDL_TRUE BINARY_HELLDL_FALSE LIBM LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBTOOL_DEPS STATIC BINARY_HELLDL_TRUE BINARY_HELLDL_FALSE LIBM LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1515,7 +1515,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1692,13 +1692,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1842,9 +1850,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -1937,6 +1942,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -3652,15 +3664,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -3778,7 +3781,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 3781 "configure"' > conftest.$ac_ext + echo '#line 3784 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5027,7 +5030,12 @@ else fi -ac_ext=cc + + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5257,6 +5265,8 @@ ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +fi + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' @@ -5350,7 +5360,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5353:" \ +echo "$as_me:5363:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5628,6 +5638,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6404,11 +6421,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6407: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6424: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6411: \$? = $ac_status" >&5 + echo "$as_me:6428: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6647,11 +6664,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6650: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6667: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6654: \$? = $ac_status" >&5 + echo "$as_me:6671: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6707,11 +6724,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6710: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6727: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6714: \$? = $ac_status" >&5 + echo "$as_me:6731: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8892,7 +8909,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10505,6 +10524,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11183,11 +11204,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11186: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11207: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11190: \$? = $ac_status" >&5 + echo "$as_me:11211: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11243,11 +11264,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11246: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11267: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11250: \$? = $ac_status" >&5 + echo "$as_me:11271: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12604,7 +12625,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13563: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13546: \$? = $ac_status" >&5 + echo "$as_me:13567: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13599,11 +13620,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13602: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13623: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13606: \$? = $ac_status" >&5 + echo "$as_me:13627: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15638,11 +15659,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15641: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15662: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15645: \$? = $ac_status" >&5 + echo "$as_me:15666: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15881,11 +15902,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15884: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15905: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15888: \$? = $ac_status" >&5 + echo "$as_me:15909: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15941,11 +15962,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15944: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15965: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:15948: \$? = $ac_status" >&5 + echo "$as_me:15969: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18126,7 +18147,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/tagdemo/Makefile.in libtool-1.5.10/tagdemo/Makefile.in --- libtool-1.5.8/tagdemo/Makefile.in 2004-08-07 21:09:25.000000000 +0900 +++ libtool-1.5.10/tagdemo/Makefile.in 2004-09-19 21:28:01.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -38,7 +38,9 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ +target_triplet = @target@ bin_PROGRAMS = tagdemo$(EXEEXT) DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \ $(srcdir)/../config.guess $(srcdir)/../config.sub \ @@ -53,8 +55,14 @@ am__configure_deps = $(am__aclocal_m4_de $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno configure.status.lineno -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" libLTLIBRARIES_INSTALL = $(INSTALL) LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES) @@ -75,12 +83,12 @@ depcomp = am__depfiles_maybe = CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -LTCXXCOMPILE = $(LIBTOOL) --mode=compile $(CXX) $(DEFS) \ +LTCXXCOMPILE = $(LIBTOOL) --mode=compile --tag=CXX $(CXX) $(DEFS) \ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ $(AM_CXXFLAGS) $(CXXFLAGS) CXXLD = $(CXX) -CXXLINK = $(LIBTOOL) --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ +CXXLINK = $(LIBTOOL) --mode=link --tag=CXX $(CXXLD) $(AM_CXXFLAGS) \ + $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ SOURCES = $(libbaz_la_SOURCES) $(libfoo_la_SOURCES) $(tagdemo_SOURCES) DIST_SOURCES = $(libbaz_la_SOURCES) $(libfoo_la_SOURCES) \ $(tagdemo_SOURCES) @@ -165,6 +173,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -254,7 +264,7 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ if test -f $$p; then \ - f="`echo $$p | sed -e 's|^.*/||'`"; \ + f=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ else :; fi; \ @@ -262,8 +272,8 @@ install-libLTLIBRARIES: $(lib_LTLIBRARIE uninstall-libLTLIBRARIES: @$(NORMAL_UNINSTALL) - @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ - p="`echo $$p | sed -e 's|^.*/||'`"; \ + @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + p=$(am__strip_dir) \ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ done @@ -430,15 +440,15 @@ distdir: $(DISTFILES) ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir - $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2 + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir - $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir @@ -451,7 +461,7 @@ dist-zip: distdir $(am__remove_distdir) dist dist-all: distdir - $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then @@ -460,11 +470,11 @@ dist dist-all: distdir distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ @@ -549,7 +559,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/tagdemo/acinclude.m4 libtool-1.5.10/tagdemo/acinclude.m4 --- libtool-1.5.8/tagdemo/acinclude.m4 2004-08-07 21:08:54.000000000 +0900 +++ libtool-1.5.10/tagdemo/acinclude.m4 2004-09-19 21:27:26.000000000 +0900 @@ -1688,7 +1688,9 @@ if test -f "$ltmain" && test -n "$tagnam case $tagname in CXX) - if test -n "$CXX" && test "X$CXX" != "Xno"; then + if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" @@ -2208,15 +2210,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -2432,10 +2425,21 @@ AC_DEFUN([AC_LIBTOOL_CXX], # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX +# _LT_AC_PROG_CXXCPP +# --------------- +AC_DEFUN([_LT_AC_PROG_CXXCPP], +[ +AC_REQUIRE([AC_PROG_CXX]) +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +fi +])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- @@ -2600,7 +2604,7 @@ AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [ AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) -AC_REQUIRE([AC_PROG_CXXCPP]) +AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= @@ -3218,6 +3222,8 @@ case $host_os in _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -4398,6 +4404,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDGIRSTW]]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; diff -ruNp libtool-1.5.8/tagdemo/aclocal.m4 libtool-1.5.10/tagdemo/aclocal.m4 --- libtool-1.5.8/tagdemo/aclocal.m4 2004-08-07 21:09:09.000000000 +0900 +++ libtool-1.5.10/tagdemo/aclocal.m4 2004-09-19 21:27:44.000000000 +0900 @@ -1,4 +1,4 @@ -# generated automatically by aclocal 1.8.5 -*- Autoconf -*- +# generated automatically by aclocal 1.9.1 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. @@ -33,14 +33,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.8"]) +AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.8.5])]) + [AM_AUTOMAKE_VERSION([1.9.1])]) # AM_AUX_DIR_EXPAND @@ -108,7 +108,7 @@ am_aux_dir=`cd $ac_aux_dir && pwd` # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997, 2000, 2001, 2003 Free Software Foundation, Inc. +# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -145,8 +145,8 @@ else fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]) + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) fi])]) # serial 7 -*- Autoconf -*- @@ -319,7 +319,8 @@ AC_SUBST([AMDEPBACKSLASH]) # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004 +# Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -355,27 +356,21 @@ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS else continue fi - grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue @@ -406,7 +401,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS] # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -482,7 +477,6 @@ AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_MISSING_PROG(AMTAR, tar) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl @@ -491,7 +485,9 @@ AC_REQUIRE([AM_PROG_MKDIR_P])dnl AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl - +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], @@ -734,13 +730,21 @@ fi # this.) AC_DEFUN([AM_PROG_MKDIR_P], [if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -906,4 +910,112 @@ fi INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + m4_include([acinclude.m4]) diff -ruNp libtool-1.5.8/tagdemo/configure libtool-1.5.10/tagdemo/configure --- libtool-1.5.8/tagdemo/configure 2004-08-07 21:09:31.000000000 +0900 +++ libtool-1.5.10/tagdemo/configure 2004-09-19 21:28:07.000000000 +0900 @@ -465,7 +465,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB F77 FFLAGS ac_ct_F77 LIBTOOL LIBM LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB F77 FFLAGS ac_ct_F77 LIBTOOL LIBM LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -1624,7 +1624,7 @@ test -n "$target_alias" && ## ------------------------ ## ## Automake Initialisation. ## ## ------------------------ ## -am__api_version="1.8" +am__api_version="1.9" # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -1776,13 +1776,21 @@ echo "$as_me: WARNING: \`missing' script fi if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then - # Keeping the `.' argument allows $(mkdir_p) to be used without - # argument. Indeed, we sometimes output rules like + # We used to keeping the `.' as first argument, in order to + # allow $(mkdir_p) to be used without argument. As in # $(mkdir_p) $(somedir) - # where $(somedir) is conditionally defined. - # (`test -n '$(somedir)' && $(mkdir_p) $(somedir)' is a more - # expensive solution, as it forces Make to start a sub-shell.) - mkdir_p='mkdir -p -- .' + # where $(somedir) is conditionally defined. However this is wrong + # for two reasons: + # 1. if the package is installed by a user who cannot write `.' + # make install will fail, + # 2. the above comment should most certainly read + # $(mkdir_p) $(DESTDIR)$(somedir) + # so it does not work when $(somedir) is undefined and + # $(DESTDIR) is not. + # To support the latter case, we have to write + # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), + # so the `.' trick is pointless. + mkdir_p='mkdir -p --' else # On NextStep and OpenStep, the `mkdir' command does not # recognize any option. It will interpret all options as @@ -1926,9 +1934,6 @@ AUTOHEADER=${AUTOHEADER-"${am_missing_ru MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -AMTAR=${AMTAR-"${am_missing_run}tar"} - install_sh=${install_sh-"$am_aux_dir/install-sh"} # Installed binaries are usually stripped using `strip' when the user @@ -2021,6 +2026,13 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(inst # We need awk for the "check" target. The system "awk" is bad on # some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + @@ -4621,15 +4633,6 @@ irix5* | irix6* | nonstopux*) # This must be Linux ELF. linux*) - case $host_cpu in - alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*) - lt_cv_deplibs_check_method=pass_all ;; - *) - # glibc up to 2.1.1 does not perform some relocations on ARM - # this will be overridden with pass_all, but let us keep it just in case - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; - esac - lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` lt_cv_deplibs_check_method=pass_all ;; @@ -4746,7 +4749,7 @@ ia64-*-hpux*) ;; *-*-irix6*) # Find out which ABI we are using. - echo '#line 4749 "configure"' > conftest.$ac_ext + echo '#line 4752 "configure"' > conftest.$ac_ext if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 (eval $ac_compile) 2>&5 ac_status=$? @@ -5298,6 +5301,243 @@ fi done + +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu +echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 +echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6 +if test -z "$CXXCPP"; then + if test "${ac_cv_prog_CXXCPP+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # Double quotes because CXXCPP needs to be expanded + for CXXCPP in "$CXX -E" "/lib/cpp" + do + ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CXXCPP=$CXXCPP + +fi + CXXCPP=$ac_cv_prog_CXXCPP +else + ac_cv_prog_CXXCPP=$CXXCPP +fi +echo "$as_me:$LINENO: result: $CXXCPP" >&5 +echo "${ECHO_T}$CXXCPP" >&6 +ac_preproc_ok=false +for ac_cxx_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer to if __STDC__ is defined, since + # exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include +#else +# include +#endif + Syntax error +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + : +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether non-existent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +_ACEOF +if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 + (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null; then + if test -s conftest.err; then + ac_cpp_err=$ac_cxx_preproc_warn_flag + ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag + else + ac_cpp_err= + fi +else + ac_cpp_err=yes +fi +if test -z "$ac_cpp_err"; then + # Broken: success on invalid input. +continue +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&5 +echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=cc +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +fi + + ac_ext=f ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' @@ -5390,7 +5630,7 @@ fi # Provide some information about the compiler. -echo "$as_me:5393:" \ +echo "$as_me:5633:" \ "checking for Fortran 77 compiler version" >&5 ac_compiler=`set X $ac_compile; echo $2` { (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 @@ -5668,6 +5908,13 @@ hpux*) # Its linker distinguishes data f lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; +linux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDGIRSTW]' + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + fi + ;; irix* | nonstopux*) symcode='[BCDEGRST]' ;; @@ -6444,11 +6691,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6447: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6694: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6451: \$? = $ac_status" >&5 + echo "$as_me:6698: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6687,11 +6934,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6690: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6937: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:6694: \$? = $ac_status" >&5 + echo "$as_me:6941: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -6747,11 +6994,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:6750: $lt_compile\"" >&5) + (eval echo "\"\$as_me:6997: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:6754: \$? = $ac_status" >&5 + echo "$as_me:7001: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -8932,7 +9179,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext </dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then ac_ext=cc ac_cpp='$CXXCPP $CPPFLAGS' ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -10545,6 +10794,8 @@ if test -z "$aix_libpath"; then aix_libp ld_shlibs_CXX=no ;; openbsd*) + hardcode_direct_CXX=yes + hardcode_shlibpath_var_CXX=no archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then @@ -11223,11 +11474,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11226: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11477: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:11230: \$? = $ac_status" >&5 + echo "$as_me:11481: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -11283,11 +11534,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:11286: $lt_compile\"" >&5) + (eval echo "\"\$as_me:11537: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:11290: \$? = $ac_status" >&5 + echo "$as_me:11541: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -12644,7 +12895,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext <&5) + (eval echo "\"\$as_me:13833: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:13586: \$? = $ac_status" >&5 + echo "$as_me:13837: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -13639,11 +13890,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:13642: $lt_compile\"" >&5) + (eval echo "\"\$as_me:13893: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:13646: \$? = $ac_status" >&5 + echo "$as_me:13897: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -15678,11 +15929,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15681: $lt_compile\"" >&5) + (eval echo "\"\$as_me:15932: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15685: \$? = $ac_status" >&5 + echo "$as_me:15936: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15921,11 +16172,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15924: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16175: $lt_compile\"" >&5) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&5 - echo "$as_me:15928: \$? = $ac_status" >&5 + echo "$as_me:16179: \$? = $ac_status" >&5 if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings @@ -15981,11 +16232,11 @@ else -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:15984: $lt_compile\"" >&5) + (eval echo "\"\$as_me:16235: $lt_compile\"" >&5) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&5 - echo "$as_me:15988: \$? = $ac_status" >&5 + echo "$as_me:16239: \$? = $ac_status" >&5 if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized @@ -18166,7 +18417,7 @@ else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < conftest.$ac_ext < /dev/null || continue - # Extract the definition of DEP_FILES from the Makefile without - # running `make'. + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` - test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" - # We invoke sed twice because it is the simplest approach to - # changing $(DEPDIR) to its actual value in the expansion. - for file in `sed -n ' - /^DEP_FILES = .*\\\\$/ { - s/^DEP_FILES = // - :loop - s/\\\\$// - p - n - /\\\\$/ b loop - p - } - /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue diff -ruNp libtool-1.5.8/tests/Makefile.in libtool-1.5.10/tests/Makefile.in --- libtool-1.5.8/tests/Makefile.in 2004-08-07 21:03:57.000000000 +0900 +++ libtool-1.5.10/tests/Makefile.in 2004-09-19 21:21:58.000000000 +0900 @@ -1,4 +1,4 @@ -# Makefile.in generated by automake 1.8.5 from Makefile.am. +# Makefile.in generated by automake 1.9.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, @@ -32,6 +32,7 @@ POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : +build_triplet = @build@ host_triplet = @host@ subdir = tests DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in @@ -40,7 +41,7 @@ am__aclocal_m4_deps = $(top_srcdir)/acin $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) -mkinstalldirs = $(mkdir_p) +mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = @@ -140,6 +141,8 @@ am__fastdepCXX_TRUE = @am__fastdepCXX_TR am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ @@ -400,7 +403,7 @@ mostlyclean-generic: clean-generic: distclean-generic: - -rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" diff -ruNp libtool-1.5.8/tests/demo-nopic.test libtool-1.5.10/tests/demo-nopic.test --- libtool-1.5.8/tests/demo-nopic.test 2004-03-27 00:12:44.000000000 +0900 +++ libtool-1.5.10/tests/demo-nopic.test 2004-08-12 12:34:50.000000000 +0900 @@ -13,8 +13,8 @@ fi # This doesn't work on hppa HOST=`../config.guess` case "$HOST" in -hppa*) - echo "Not running on hppa, it doesn't like non-PIC shared libs" 2>&1 +hppa*|x86_64*|s390*) + echo "Not running on $HOST, it doesn't like non-PIC shared libs" 2>&1 exit 77 esac